R0106-HP MSR Router Series Network Management and Monitoring Command Reference(V7)

101
• ntp-service reliable authentication-keyid
ntp-service ipv6 dscp
Use ntp-server ipv6 dscp to configure a DSCP value for IPv6 NTP packets.
Use undo ntp-server ipv6 dscp to restore the default.
Syntax
ntp-service ipv6 dscp dscp-value
undo ntp-service ipv6 dscp
Default
The DSCP value for IPv6 NTP packets is 56.
Views
System view
Predefined user roles
network-admin
Parameters
dscp-value: Specifies a DSCP value in the range of 0 to 63 for IPv6 NTP packets.
Usage guidelines
The DSCP value is included in the Traffic Class field of an IPv6 packet to identify the packet priority.
Examples
# Set the DSCP value for IPv6 NTP packets to 30.
<Sysname> system-view
[Sysname] ntp-service ipv6 dscp 30
ntp-service ipv6 inbound disable
Use ntp-service ipv6 inbound disable to disable an interface from processing IPv6 NTP messages.
Use undo ntp-service ipv6 inbound disable to restore the default.
Syntax
ntp-service ipv6 inbound disable
undo ntp-service ipv6 inbound disable
Default
An interface processes IPv6 NTP messages.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
Execute the command on an interface in the following cases: