R0106-HP MSR Router Series Network Management and Monitoring Command Reference(V7)

124
Table 21 Command output
Field Description
PSE ID ID of the PSE.
Slot No. Slot number of the PSE.
SSlot No. Sub-slot number of the PSE.
PortNum Number of PIs on the PSE.
MaxPower(W) Maximum power of the PSE.
State
PSE status:
• On—The PSE is supplying power.
• Off—The PSE stops supplying power.
• Faulty—The PSE has failed.
Model PSE model.
display poe interface
Use display poe interface to display power supplying information for PIs.
Syntax
display poe interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
If you do not specify any interface, this command displays power supplying information for all PIs.
Examples
# Display power supplying information for GigabitEthernet 2/1/1.
<Sysname> display poe interface gigabitethernet 2/1/1
PoE Status : Enabled
Power Priority : Critical
Oper : On
IEEE Class : 1
Detection Status : Delivering power
Power Mode : Signal
Current Power : 11592 mW
Average Power : 11610 mW
Peak Power : 11684 mW
Max Power : 15400 mW