R0106-HP MSR Router Series Network Management and Monitoring Command Reference(V7)

131
Field Description
Legacy PD Detection
Nonstandard PD detection status:
• Enabled.
• Disabled.
Power Utilization Threshold PSE power alarm threshold.
PSE Power Policy PSE power management policy mode.
PD Power Policy PD power management policy mode.
PD Disconnect Detection Mode PD disconnection detection mode.
display poe pse interface
Use display poe pse interface to display the PoE status of all PIs on a PSE.
Syntax
display poe pse pse-id interface
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
pse pse-id: Specifies a PSE ID.
Usage guidelines
To view PSE ID and slot mappings, use the display poe device command.
Examples
# Display the status of all PIs on PSE 7.
<Sysname> display poe pse 7 interface
Interface PoE Priority CurPower Oper IEEE Detection
(W) Class Status
GE2/1/1 Enabled Low 4.4 On 1 Delivering
Power
GE2/1/2 Enabled Critical 0.0 Power-lack - Disabled
GE2/1/3 Enabled Low 0.0 Power-deny - Disabled
GE2/1/4 Enabled Critical 0.0 On - Searching
GE2/1/5 Enabled Low 4.0 Power-limit 2 Delivering
Power
GE2/1/6 Enabled Low 0.0 Power-itself - Disabled
GE2/1/7 Disabled Low 0.0 Off - Fault
--- On State Ports: 2; Used: 8.4(W); Remaining: 171.6 (W) ---