R0106-HP MSR Router Series Network Management and Monitoring Command Reference(V7)

140
Parameters
max-power: Sets the maximum power in milliwatts allocated to a PI. The maximum PI power of the
SIC-4FSWP, SIC 4GSWP, and DSIC 9FSWP is in the range of 1 to 15400 milliwatts. The maximum PI
power of the HMIM 24GSW-POE is in the range of 1 to 16600 milliwatts.
Examples
# Set the maximum power of a PI to 12000 milliwatts in PI view.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] poe max-power 12000
# Set the maximum power of a PI to 12000 milliwatts in PoE profile view.
<Sysname> system-view
[Sysname] poe-profile abc
[Sysname-poe-profile-abc-1] poe max-power 12000
Related commands
poe max-power(system view)
poe max-power (system view)
Use poe max-power to configure the maximum power for a PSE.
Use undo poe max-power to restore the default maximum power of a PSE.
Syntax
poe pse pse-id max-power max-power
undo poe pse pse-id max-power
Default
The default maximum power of the PSE is 37 W.
Views
System view
Predefined user roles
network-admin
Parameters
max-power: Sets the maximum power in watts of the PSE. The maximum PSE power of the SIC-4FSWP
and SIC-4GSWP is in the range of 37 to 87 W. The maximum PSE power of the DSIC-9FSWP is in the
range of 37 to 174.
pse pse-id: Specifies a PSE by its ID.
Usage guidelines
To avoid the PoE power overload situations, make sure the total power of all PSEs is less than the
maximum PoE power.
The maximum power of the PSE must be greater than or equal to the total maximum power of all critical
PIs on the PSE to guarantee these PIs power.
Examples
# Set the maximum power of PSE 7 to 38 watts.