R0106-HP MSR Router Series Network Management and Monitoring Command Reference(V7)

145
Predefined user roles
network-admin
Parameters
full: Upgrades the PSE firmware in full mode.
refresh: Upgrades the PSE firmware in refresh mode.
filename: Specifies the name of the upgrade file, a case-sensitive string of 1 to 64 characters. The
specified file must be in the root directory of the file system of the device.
pse pse-id: Specifies a PSE by its ID. If you do not specify any PSE, all PSEs are upgraded.
Usage guidelines
Typically, you can upgrade the firmware in refresh mode. Upgrade the firmware in full mode only in the
following cases:
• You fail to upgrade the software in refresh mode.
• The current firmware is unavailable, and execution of all PoE commands fail.
Examples
# Upgrade the firmware of PSE 7 in service.
<Sysname> system-view
[Sysname] poe update refresh 0400_001.S19 pse 7
poe-profile
Use poe-profile to create a PoE profile and enter PoE profile view.
Use undo poe-profile to delete the specified PoE profile.
Syntax
poe-profile profile-name [ index ]
undo poe-profile { index index | name profile-name }
Default
No PoE profile is created.
Views
System view
Predefined user roles
network-admin
Parameters
profile-name: Specifies the name of a PoE profile, a case-sensitive string of 1 to 15 characters. A PoE
configuration file name begins with a letter and must not contain reserved keywords such as undo, all,
name, interface, user, poe, disable, max-power, mode, priority, or enable.
index: Specifies the index number of a PoE profile, in the range of 1 to 100.
Usage guidelines
If you do not specify any profile index, the system automatically assigns an index (starting from 1) to the
PoE profile.