R0106-HP MSR Router Series Network Management and Monitoring Command Reference(V7)

163
Examples
# Display the modules that can generate notification and their notification function status.
<Sysname> display snmp-agent trap-list
arp notification is disabled.
configuration notification is enabled.
l3vpn notification is enabled.
mac-address notification is enabled.
radius notification is disabled.
standard notification is enabled.
system notification is enabled.
Enabled notifications: 5; Disabled notifications: 2
Related commands
snmp-agent trap enable
display snmp-agent usm-user
Use display snmp-agent usm-user to display SNMPv3 user information.
Syntax
display snmp-agent usm-user [ engineid engineid | group group-name | username user-name ] *
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
engineid engineid: Displays SNMPv3 user information for the SNMP engine ID identified by engineid.
When an SNMPv3 user is created, the system records the local SNMP entity engine ID. The user
becomes invalid when the engine ID changes, and it becomes valid again when the recorded engine ID
is restored.
group group-name: Displays SNMPv3 user information for a specified SNMP group name. The group
name is case sensitive.
username user-name: Displays information about the specified SNMPv3 user. The username is case
sensitive.
Usage guidelines
This command displays only SNMPv3 users that you have created by using the snmp-agent usm-user v3
command. To display SNMPv1 or SNMPv2c users created by using the snmp-agent usm-user { v1 | v2c }
command, use the display snmp-agent community command.
Examples
# Display information about all SNMPv3 users.
<Sysname> display snmp-agent usm-user
Username: userv3
Group name: mygroupv3