R0106-HP MSR Router Series Network Management and Monitoring Command Reference(V7)

226
[Sysname] cwmp
[Sysname-cwmp] cwmp enable
Related commands
cwmp
display cwmp configuration
Use display cwmp configuration to display the CWMP configuration.
Syntax
display cwmp configuration
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the CWMP configuration after CWMP is enabled.
<Sysname> display cwmp configuration
CWMP state : Enabled
ACS URL : http://www.acs.com:80/acs
ACS username : newname
ACS default URL : Null
ACS default username : defname
Periodic inform : Disabled
Inform interval : 600s
Inform time : None
Wait timeout : 30s
Connection retries : Unlimited
Source IP interface : None
STUN state : Disable
SSL policy name : Null
Table 53 Command output
Field Descri
p
tion
CWMP state Status of CWMP: Enabled or Disabled.
ACS URL
Preferred ACS URL.
This field displays Null if no preferred ACS URL has been specified.
ACS username Username for the CPE to authenticate to the ACS.
ACS default URL
Default ACS URL.
The CPE attempts to connect to the default ACS URL if no ACS URL has been
assigned to it through the cwmp acs url command, ACS, or DHCP.
This field displays Null if no default ACS URL has been configured.