R0106-HP MSR Router Series Network Management and Monitoring Command Reference(V7)

235
Predefined user roles
network-admin
Parameters
active: Displays policies that are running.
registered: Displays policies that have been created.
policy-name: Specifies a policy by its name. If you do not specify a policy, the command displays all
monitor policies that are running or have been created.
verbose: Displays detailed information about monitor policies.
Examples
# Display all running monitor policies.
<Sysname> display rtm policy active
JID Type Event TimeActive PolicyName
507 TCL INTERFACE Aug 29 14:55:55 2013 test
# Display all monitor policies that have been created.
<Sysname> display rtm policy registered
Total number: 1
Type Event TimeRegistered PolicyName
CLI Aug 29 14:54:50 2013 test
# Display detailed information about all monitor policies.
<Sysname> display rtm policy registered verbose
Total number: 1
Policy Name: test
Policy Type: CLI
Event Type:
TimeRegistered: Aug 29 14:54:50 2013
User-role: network-operator
network-admin
Table 55 Command output
Field Descri
p
tion
JID Job ID. This field is available for the display rtm policy active command.
PolicyName Monitor policy name.
Type
Policy Type
Policy creation method:
• TCL—The policy was configured by using Tcl.
• CLI—The policy was configured from the CLI.
Event
Event Type
Source of the event specified in the policy.
Options include CLI, hotplug, interface, process, SNMP, SNMP_Notification, and
SYSLOG.
TimeActive Time when the policy started to execute.
TimeRegistered Time when the policy was created.
Total number Total number of policies.