R0106-HP MSR Router Series Network Management and Monitoring Command Reference(V7)

237
[Sysname-rmt-test] event cli async skip mode execute pattern dis inter brief
# Configure a CLI-defined policy to monitor the use of the Tab key at command lines that contain the dis
inter brief string. Enable the system to execute the actions in the policy and display the complete
parameter when Tab is pressed at a policy-matching command line.
<Sysname> system-view
[Sysname] rtm cli-policy test
[Sysname-rmt-test] event cli async mode tab pattern dis inter brief
# Configure a CLI-defined policy to monitor the use of the question mark (?) at command lines that
contain the dis inter brief string. Enable the system to execute a policy-matching command line only if the
actions in the policy are executed successfully when a question mark is entered at the command line.
<Sysname>system-view
[Sysname] rtm cli-policy test
[Sysname-rmt-test] event cli sync mode help pattern dis inter brief
event hotplug
Use event hotplug to configure a hotplug event for a CLI-defined monitor policy.
Use undo event to delete the event in a CLI-defined monitor policy.
Syntax
MSR2000/MSR3000:
event hotplug slot slot-number
undo event
MSR4000:
event hotplug slot slot-number [ subslot subslot-number ]
undo event
Default
No hotplug events are configured.
Views
CLI-defined policy view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies a card by its slot number.
subslot subslot-number: Specifies a subcard by its subslot number. If you do not specify a subcard, EAA
monitors all subcards on the specified card for card swapping events.
Usage guidelines
Use hotplug event monitor policies to monitor cards for card swapping performed while the device is
operating.
You can configure only one event for one monitor policy. If the monitor policy already contains an event,
the new event replaces the old event.