R0106-HP MSR Router Series Network Management and Monitoring Command Reference(V7)

17
destination ipv6
Use destination ipv6 to configure the destination IPv6 address for the operation.
Use undo destination ipv6 to remove the destination IPv6 address.
Syntax
destination ipv6 ipv6-address
undo destination ipv6
Default
No destination IPv6 address is configured for the operation.
Views
DNS template view, ICMP template view, TCP template view
Predefined user roles
network-admin
Parameters
ipv6-address: Specifies the destination IPv6 address for the operation. IPv6 link-local addresses are not
supported.
Examples
# In ICMP template view, configure the destination IPv6 address for the operation as 1::1.
<Sysname> system-view
[Sysname] nqa template icmp icmptplt
[Sysname-nqatplt-icmp-icmptplt] destination ipv6 1::1
destination port
Use destination port to configure the destination port number for the operation.
Use undo destination port to remove the destination port number.
Syntax
destination port port-number
undo destination port
Default
No destination port number is configured for the operation.
Views
TCP/voice operation view
UDP echo operation view
UDP jitter operation view
DNS/TCP template view
Predefined user roles
network-admin