R0106-HP MSR Router Series Network Management and Monitoring Command Reference(V7)

282
slot slot-number: Specifies an MPU by its slot number. If you do not specify this option, the active MPU is
specified. (MSR4000.)
cpu cpu-number: Specifies a CPU by its number.
Usage guidelines
You can disable kernel thread deadloop detection for up to 128 kernel threads by executing this
command.
Inappropriate use of this command can cause service problems or system breakdown. Make sure you
understand the impact of this command on your network before you use it.
Examples
# Disable kernel thread deadloop detection for kernel thread 15.
<Sysname> system-view
[Sysname]monitor kernel deadloop exclude-thread 15
Related commands
• display kernel deadloop configuration
• display kernel deadloop
• monitor kernel deadloop enable
• monitor kernel deadloop time
monitor kernel deadloop time
Use monitor kernel deadloop time to set the interval for identifying a kernel thread deadloop.
Use undo monitor kernel deadloop time to restore the default.
Syntax
MSR2000/MSR3000:
monitor kernel deadloop time interval
undo monitor kernel deadloop time
MSR4000:
monitor kernel deadloop time interval [ slot slot-number [ cpu cpu-number ] ]
undo monitor kernel deadloop time [ slot slot-number [ cpu cpu-number ] ]
Default
The interval for identifying a kernel thread deadloop is 8 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
time interval: Specifies the interval for identifying a kernel thread deadloop, in the range of 1 to 65535
seconds.
slot slot-number: Specifies an MPU by its slot number. If you do not specify this option, the active MPU is
specified. (MSR4000.)