R0106-HP MSR Router Series Network Management and Monitoring Command Reference(V7)

319
prefix-port: Specifies the prefix-port aggregation by the following criteria:
• Source prefix.
• Destination prefix.
• Source address mask length.
• Destination address mask length.
• ToS.
• Protocol number.
• Source port.
• Destination port.
• Inbound interface index.
• Outbound interface index.
protocol-port: Specifies the protocol-port aggregation by protocol number, source port, and destination
port.
source-prefix: Specifies the source-prefix aggregation by source AS number, source address mask length,
source prefix, and inbound interface index.
tos-as: Specifies the ToS-AS aggregation by ToS, source AS number, destination AS number, inbound
interface index, and outbound interface index.
tos-bgp-nexthop: Specifies the ToS-BGP nexthop aggregation by ToS, BGP next hop address, and
outbound interface index. ToS-BGP next hop aggregation is supported by a version 9 template.
tos-destination-prefix: Specifies the ToS-destination-prefix aggregation by ToS, destination AS number,
destination address mask length, destination prefix, and outbound interface index.
tos-prefix: Specifies the ToS-prefix aggregation by the following criteria:
• ToS.
• Source AS number.
• Source prefix.
• Source address mask length.
• Destination AS number.
• Destination address mask length.
• Destination prefix.
• Inbound interface index.
• Outbound interface index.
tos-protocol-port: Specifies the ToS-protocol-port aggregation by ToS, protocol number, source port,
destination port, inbound interface index, and outbound interface index.
tos-source-prefix: Specifies the ToS-source-prefix aggregation by ToS, source AS number, source prefix,
source address mask length, and inbound interface index.
Usage guidelines
In NetStream aggregation mode view, you can perform the following tasks:
• Enable or disable the specified NetStream aggregation mode.
• Configure source interface, destination IP address, and destination port for the NetStream data
export.