R0106-HP MSR Router Series Network Management and Monitoring Command Reference(V7)
320
A flow matching multiple aggregation modes is counted as multiple aggregate flows.
Examples
# Set the NetStream aggregation mode as AS, and enter the NetStream AS aggregation view.
<Sysname> system-view
[Sysname] ip netstream aggregation as
Related commands
enable
ip netstream export host
Use ip netstream export host to specify a destination host for the NetStream data export.
Use undo ip netstream export host to remove the specified destination host or all destination hosts that
are configured in the current view.
Syntax
ip netstream export host ip-address udp-port [ vpn-instance vpn-instance-name ]
undo ip netstream export host [ ip-address [ vpn-instance vpn-instance-name ] ]
Default
No destination host is specified.
Views
System view, NetStream aggregation mode view
Predefined user roles
network-admin
Parameters
ip-address: Specifies the destination IP address.
udp-port: Specifies the destination UDP port number, in the range of 0 to 65535.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance to which the destination host
belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If the
destination is on the public network, do not specify this option.
Usage guidelines
You can specify the same destination host in different NetStream aggregation mode views.
The destination hosts in a NetStream aggregation mode view take precedence over those in system view.
If no destination host is specified in a NetStream aggregation mode view, the destination host in system
view applies.
You can specify a maximum of four destination hosts in system view or a NetStream aggregation mode
view. If you specify a destination host with the same IP addresses but different UDP ports, the most recent
configuration takes effect. You can specify destination hosts with the same IP address and UDP port but
different VPN instances.
NetStream traditional data are exported to all destination hosts in system view. NetStream aggregation
data are exported to all destination hosts in the related NetStream aggregation mode view. If you expect
the aggregation data only, you can specify destination hosts in only the NetStream aggregation mode
view. This setting reduces bandwidth occupation.