R0106-HP MSR Router Series Network Management and Monitoring Command Reference(V7)

334
Field Descri
p
tion
Type DstIP(Port) SrcIP(Port) Pro TC
FlowLbl If(Direct) Pkts
Statistics of the active flows in the current cache:
• Flow type. Flows are classified into the following types:
{
IP flows.
{
Layer 2 flows with IPv6 protocol information (IPL2).
{ MPLS flows without IP options (MPLS).
{ MPLS flows with IP options (IP&MPLS).
• Destination IPv6 address (destination port).
• Source IPv6 address (source port).
• Protocol number.
• Traffic classification.
• Flow label.
• Interface type and name (direction).
• Number of packets.
ICMPv6 packets do not contain port number fields, so the type
and code fields are captured. The value for the destination port
represents these two fields:
• The highest 8 bits represent the type field.
• The lowest 8 bits represent the code field.
The value for the source port is set to 0 and does not indicate any
statistics.
DstMAC(VLAN) SrcMAC(VLAN)
Layer 2 information for the active flows in the current cache:
• Destination MAC address.
• Destination VLAN ID.
• Source MAC address.
• Source VLAN ID.
TopLblType(IP/MASK) Lbl-Exp-S-List
Information about the active MPLS flows in the current cache:
• Type of the labels at the top of the label stack:
{ IP address associated with the label.
{ Mask associated with the label.
• Label list:
{ Lbl—20-bit label value.
{ Exp—3-bit field for implementing QoS.
{ S—1-bit bottom of stack flag. The S field is set to 1 if the
label is the bottom label and set to 0 if not.