R0106-HP MSR Router Series Network Management and Monitoring Command Reference(V7)

342
• Destination prefix.
• Input interface index.
• Output interface index.
protocol-port: Specifies the protocol-port aggregation by protocol number, source port, and destination
port.
source-prefix: Specifies the source-prefix aggregation by source AS number, source address mask length,
source prefix, and input interface index.
Usage guidelines
In IPv6 NetStream aggregation mode view, you can perform the following tasks:
• Enable or disable the specified IPv6 NetStream aggregation mode.
• Configure source interface, destination IPv6 address, and destination port for the IPv6 NetStream
data export.
A flow matching multiple aggregation modes is counted as multiple aggregate flows.
Examples
# Set the IPv6 NetStream aggregation mode as AS, and enter the IPv6 NetStream AS aggregation view.
<Sysname> system-view
[Sysname] ipv6 netstream aggregation as
Related commands
enable
ipv6 netstream export host
Use ipv6 netstream export host to specify a destination host for the IPv6 NetStream data export.
Use undo ipv6 netstream export host to remove the specified destination host or all destination hosts that
are configured in the current view.
Syntax
ipv6 netstream export host { ip-address | ipv6-address } udp-port [ vpn-instance vpn-instance-name ]
undo ipv6 netstream export host [ ip-address | ipv6-address [ vpn-instance vpn-instance-name ] ]
Default
No destination host is specified.
Views
System view, IPv6 NetStream aggregation mode view
Predefined user roles
network-admin
Parameters
ip-address: Specifies the destination IP address.
Ipv6-address: Specifies the destination IPv6 address.
udp-port: Specifies the destination UDP port number, in the range of 0 to 65535.