R0106-HP MSR Router Series Network Management and Monitoring Command Reference(V7)

346
Syntax
ipv6 netstream export v9-template refresh-rate time minutes
undo ipv6 netstream export v9-template refresh-rate time
Default
Version 9 templates are resent every 30 minutes.
Views
System view
Predefined user roles
network-admin
Parameters
minutes: Specifies the refresh interval that the device waits before IPv6 NetStream version 9 templates are
sent to NetStream servers. The value range is 1 to 3600 minutes.
Usage guidelines
Version 9 is template-based and supports user-defined formats. An IPv6 NetStream-enabled device must
periodically resend the updated template to NetStream servers. A server cannot associate the statistics
with their proper fields when the following conditions exist:
• The version 9 template is changed on the IPv6 NetStream-enabled device.
• The version 9 template is not updated on a NetStream server.
To avoid this situation, configure the refresh frequency for version 9 templates so that NetStream servers
can refresh them.
The refresh frequency and the refresh interval can both be configured. The template is resent when either
of the conditions is reached.
Examples
# Configure the device to wait for 60 minutes before resending IPv6 NetStream version 9 templates to
NetStream servers.
<Sysname> system-view
[Sysname] ipv6 netstream export v9-template refresh-rate time 60
Related commands
ipv6 netstream export v9-template refresh-rate packet
ipv6 netstream export version 9
Use ipv6 netstream export version 9 to perform the following tasks:
• Export IPv6 NetStream data in the version 9 format.
• Choose whether to record data about AS and BGP next hop information.
Use undo ipv6 netstream export version to restore the default.
Syntax
ipv6 netstream export version 9 [ origin-as | peer-as ] [ bgp-nexthop ]
undo ipv6 netstream export version