R0106-HP MSR Router Series Network Management and Monitoring Command Reference(V7)

34
Monitored
performance
metric
Threshold
type
Collect data in Checked Num Over-threshold Num
average N/A N/A N/A
OWD-DS/OWD-SD N/A
Packets sent in the
counting interval.
Number of sent
packets.
Number of packets of
which the one-way delay
exceeds the threshold.
packet-loss accumulate
Packets sent in the
counting interval.
Number of sent
packets.
Number of packet loss.
ICPIF N/A N/A N/A N/A
MOS N/A N/A N/A N/A
Related commands
statistics interval
expect data
Use expect data to configure the expected data.
Use undo expect data to restore the default.
Syntax
expect data expression [ offset number ]
undo expect data
Default
No expected data is configured.
Views
HTTP template view, TCP template view
Predefined user roles
network-admin
Parameters
expression: Specifies the expected data, a case-sensitive string of 1 to 200 characters.
offset number: Specifies the offset between the expected data and the actual data. The value range for
the number argument is 0 to 1000, and the default value is 0.
Usage guidelines
After you configure the expected data for the NQA operation, the NQA client checks the data in the
received response. If the actual data is the same as the expected data, it considers the NQA destination
device legal.
For an HTTP template, the expected data is checked only when the actual response contains the
Content-Length header.
For a TCP template, the expected data is checked only when the data-fill command and the expect data
command are configured.