R0106-HP MSR Router Series Network Management and Monitoring Command Reference(V7)

64
Examples
# Configure the system to send a trap if five or more consecutive probe failures occur in an ICMP echo
operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] reaction trap probe-failure 5
reaction trigger probe-fail
Use reaction trigger probe-fail to configure the number of consecutive probe failures that lead to an
operation failure.
Use undo reaction trigger probe-fail to restore the default.
Syntax
reaction trigger probe-fail count
undo reaction trigger probe-fail
Default
When the number of consecutive probe failures reaches 3, the operation fails.
Views
Any NQA template view
Predefined user roles
network-admin
Parameters
count: Specifies the number of consecutive probe failures, in the range of 1 to 15.
Usage guidelines
If the operation fails, the NQA client notifies the feature that uses the NQA template of the operation
failure.
Examples
# In HTTP template view, if the number of consecutive probe failures reaches 5, the operation fails.
<Sysname> system-view
[Sysname] nqa template http httptplt
[Sysname-nqatplt-http-httptplt] reaction trigger probe-fail 5
reaction trigger probe-pass
Use reaction trigger probe-pass to configure the number of consecutive successful probes that lead to a
successful operation.
Use undo reaction trigger probe-fail to restore the default.
Syntax
reaction trigger probe-pass count
undo reaction trigger probe-pass