R0106-HP MSR Router Series Network Management and Monitoring Command Reference(V7)

73
[Sysname-nqa-admin-test] type path-jitter
[Sysname-nqa-admin-test- path-jitter] target-only
tos
Use tos to set the ToS value in the IP header for probe packets.
Use undo tos to restore the default.
Syntax
tos value
undo tos
Default
The ToS value in the IP header of probe packets is 0.
Views
Any operation view, any NQA template view
Predefined user roles
network-admin
Parameters
value: Specifies the ToS value in the range of 0 to 255.
Examples
# Set the ToS value to 1 in the IP header for probe packets.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] tos 1
# In ICMP template view, set the ToS value to 1 in the IP header for probe packets.
<Sysname> system-view
[Sysname] nqa template icmp icmptplt
[Sysname-nqatplt-icmp-icmptplt] tos 1
ttl
Use ttl to specify the TTL for probe packets.
Use undo ttl to restore the default.
Syntax
ttl value
undo ttl
Default
The TTL for probe packets is 20.
Views
DLSw/DNS/FTP/HTTP/SNMP/TCP/voice operation view
ICMP/UDP echo operation view