R0106-HP MSR Router Series Network Management and Monitoring Command Reference(V7)

74
UDP jitter operation view
Any NQA template view
Predefined user roles
network-admin
Parameters
value: Specifies the TTL for probe packets, in the range of 1 to 255.
Usage guidelines
The route-option bypass-route command sets the TTL to 1 for probe packets. The ttl command does not
take effect.
Examples
# Configure the TTL as 16 for probe packets.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] ttl 16
# In ICMP template view, configure the TTL as 16 for probe packets.
<Sysname> system-view
[Sysname] nqa template icmp icmptplt
[Sysname-nqatplt-icmp-icmptplt] ttl 16
type
Use type to specify the operation type of the NQA operation and enter operation type view.
Syntax
type { dhcp | dlsw | dns | ftp | http | icmp-echo | path-jitter | snmp | tcp | udp-echo | udp-jitter |
voice }
Default
No operation type is specified.
Views
NQA operation view
Predefined user roles
network-admin
Parameters
dhcp: Specifies the DHCP operation type.
dlsw: Specifies the DLSw operation type.
dns: Specifies the DNS operation type.
ftp: Specifies the FTP operation type.
http: Specifies the HTTP operation type.
icmp-echo: Specifies the ICMP echo operation type.
path-jitter: Specifies the path jitter operation type.