R0106-HP MSR Router Series Network Management and Monitoring Command Reference(V7)

75
snmp: Specifies the SNMP operation type.
tcp: Specifies the TCP operation type.
udp-echo: Specifies the UDP echo operation type.
udp-jitter: Specifies the UDP jitter operation type.
voice: Specifies the voice operation type.
Examples
# Specify the type of FTP operation and enter FTP operation view.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type ftp
[Sysname-nqa-admin-test-ftp]
url
Use url to specify the URL of the destination HTTP or FTP server.
Use undo url to remove the URL.
Syntax
url url
undo url
Views
FTP/HTTP operation view
FTP/HTTP template view
Predefined user roles
network-admin
Parameters
url: Specifies the URL of the destination server, a case-sensitive string of 1 to 255 characters. Spaces and
question marks (?) are not allowed. The following table describes the URL format and parameters for
different operations.
O
p
eration URL format Parameter descri
p
tion
HTTP operation
http://host/resource
http://host:port/resource
The host parameter represents a dot-separated
case-sensitive string of 1 to 255 characters including
letters, digits, hyphens (-), and underscores (_),
aabbcc.com for example. Each part consists of 1 to 63
characters, and consecutive dots (.) are not allowed.
For description about the filename parameter, see
Fundamentals Configuration Guide.
FTP operation
ftp://host/filename
ftp://host:port/filename
Examples
# Configure the URL that the HTTP operation visits as http://www.company.com/index.htm.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type http