R0106-HP MSR Router Series Network Management and Monitoring Command Reference(V7)

78
Examples
# Apply the ICMP echo operation to vpn1.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] vpn-instance vpn1
# In FTP template view, apply the FTP operation to vpn1.
<Sysname> system-view
[Sysname] nqa template ftp ftptplt
[Sysname-nqatplt-ftp-ftptplt] vpn-instance vpn1
NQA server commands
IMPORTANT:
Configure the NQA server only for UDP jitter, TCP, UDP echo, and voice operations.
display nqa server
Use display nqa server status to display NQA server status.
Syntax
display nqa server
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display NQA server status.
<Sysname> display nqa server
nqa server is: enabled
tcp-connect:
IP Address Port Vpn-instance
2.2.2.2 2000 -
udp-echo:
IP Address Port Vpn-instance
3.3.3.3 3000 vpn1
Table 12 Command output
Field Description
tcp-connect Information about the TCP listening service on the NQA server.
udp-echo Information about the UDP listening service on the NQA server.
IP Address IP address specified for the TCP/UDP listening service on the NQA server.