R0106-HP MSR Router Series Network Management and Monitoring Command Reference(V7)

Field Descri

tion

Xmttime Transmit timestamp in the NTP message.

Filter order Dispersion information.

Reference clock status

Status of the local clock. The field is displayed only when you use

the ntp-service refclock-master command to set the local clock as a

reference clock.

When the reach field of the local clock is 255, the field is displayed

as working normally. Otherwise, the field is displayed as working

abnormally.

Total sessions Total number of associations.

display ntp-service sessions

Use display ntp-service sessions to display information about all IPv4 NTP associations.

Syntax

display ntp-service sessions [ verbose ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

verbose: Displays detailed information about all IPv4 NTP associations. If you do not specify this

keyword, the command displays only brief information about the NTP associations.

Usage guidelines

When a device is operating in NTP broadcast or multicast server mode, the display ntp-service sessions

command does not display the IPv4 NTP association information corresponding to the broadcast or

multicast server. However, the associations are counted in the total number of associations.

Examples

# Display brief information about all IPv4 NTP associations.

<Sysname> display ntp-service sessions

source reference stra reach poll now offset delay disper

********************************************************************************

[12345]LOCAL(0) LOCL 0 1 64 - 0.0000 0.0000 7937.9

[5]0.0.0.0 INIT 16 0 64 - 0.0000 0.0000 0.0000

Notes: 1 source(master), 2 source(peer), 3 selected, 4 candidate, 5 configured.

Total sessions: 1