R0106-HP MSR Router Series OAA Command Reference(V7)

5
Client ID: 2
Status: Registered
MAC Address: 00e0-fa1e-03da
Interface: GigabitEthernet1/0/2
Last registered: 02/08/2011 13:00:00
Table 1 Command output
Field Description
Status Status of the OAP client, which is always Registered.
MAC Address MAC address of the OAP client.
Interface Interface used to communicate with the OAP client.
Last registered Registration time of the client.
Related commands
display oap client info
oap client close
Use oap client close to shut down an OAP client.
Syntax
oap client close client-id
Views
System view
Predefined user roles
network-admin
Parameters
client-id: Specifies an OAP client by its ID in the range of 1 to 255.
Usage guidelines
Client IDs are assigned by the OAP manager to OAP clients to uniquely identify the clients.
This command applies only to OAP clients on Linux.
When you execute this command for a client in registered state, the OAP manager sends a shutdown
notification to the specified OAP client. The client stops after receiving the notification. When you execute
this command for a non-existent client, an error message appears.
Examples
# Shut down OAP client 1.
<Sysname> system-view
[Sysname] oap client close 1
Related commands
• display oap client summary