R0106-HP MSR Router Series OAA Command Reference(V7)

6
• oap client reboot
oap client reboot
Use oap client reboot to restart an OAP client.
Syntax
oap client reboot client-id
Views
System view
Predefined user roles
network-admin
Parameters
client-id: Specifies an OAP client by its ID in the range of 1 to 255.
Usage guidelines
Client IDs are assigned by the OAP manager to OAP clients to uniquely identify the clients.
When you execute this command for a client in registered state, the OAP manager sends a restart
notification to the specified OAP client. The client restarts after receiving the notification. When you
execute this command for a non-existent client, an error message appears.
Examples
# Restart OAP client 1.
<Sysname> system-view
[Sysname] oap client reboot 1
Related commands
• display oap client summary
• oap client close
oap enable
Use oap enable to enable OAP.
Use undo oap enable to disable OAP.
Syntax
oap enable
undo oap enable
Default
OAP is disabled on an interface.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view, Layer 3 aggregate interface view
Predefined user roles
network-admin