R0106-HP MSR Router Series OAA Configuration Guide(V7)

5
• Display OAP client information.
An OAP manager can manage up to 255 OAP clients.
OAP manager timers
The OAP manager uses two timers:
• Clock synchronization timer—Regularly triggers the OAP manager to send clock and time zone
synchronization notifications to OAP clients. This mechanism keeps the clients' clocks synchronized
with the manager's clock.
• Client monitoring timer—Regularly triggers the OAP manager to send client monitoring packets to
OAP clients.
Configuring OAP
Enabling OAP
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter interface view.
interface interface-type
interface-number
N/A
3. Enable OAP.
oap enable
By default, OAP is disabled on an
interface.
Setting the clock synchronization timer
Ste
p
Command Remarks
1. Enter system view.
system-view
N/A
2. Set the clock synchronization timer.
oap timer clock-sync minutes
By default, the clock
synchronization timer is set to 5
minutes.
Setting the client monitoring timer
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Set the client monitoring timer.
oap timer monitor seconds
By default, the client monitoring
timer is set to 5 seconds.
Managing OAP clients
You can restart or shut down an OAP client.