HP MSR Router Series Probe Command Reference(V7) Part number: 5998-5637 Software version: CMW710-R0106 Document version: 6PW100-20140607
Legal and notice information © Copyright 2014 Hewlett-Packard Development Company, L.P. No part of this documentation may be reproduced or transmitted in any form or by any means without prior written consent of Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.
Contents Probe commands·························································································································································· 1 B ·························································································································································································· 1 bcm ·········································································································································
display display display display display hardware hardware hardware hardware hardware internal physical mgf debugging ························································································· 27 internal physical poe ············································································································· 27 internal physical poe debugging ························································································· 28 internal physical poe portinfo ·········
display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display system system system system system system system system system system system sy
display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display system system system system system system system system system system system sy
display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display display system system system system system system system system system system system sy
display system internal ospfv3 vlink standby ··································································································· 134 display system internal pbr fib ··························································································································· 134 display system internal pbr kernel policy·········································································································· 134 display system internal pbr policy ················
multicast record ··················································································································································· 156 P ····················································································································································································· 157 probe ·····················································································································································
Probe commands The commands in this book are designed only for developers to debug software. B bcm Use bcm to execute probe commands for a Broadcom chip. Syntax bcm chassis-num slot-num/subslot-num chip-num string Views Probe view Predefined user roles network-admin network-operator Parameters chassis-num: Specifies a chassis by its number, which is always 0. slot-num: Specifies a slot by its number in the range of 0 to 255. subslot-num: Specifies a subslot by its number in the range of 0 to 255.
Default HA submodule debugging is disabled. Views User view Predefined user roles network-admin Parameters all: Specifies debugging for all HA submodules. config: Specifies config submodule debugging. fsm: Specifies FSM submodule debugging. policy: Specifies policy submodule debugging. standby: Specifies backup HA submodule debugging. sync: Specifies sync submodule debugging. debugging lipc Use debugging lipc to enable debugging for LIPC.
debugging physical Use debugging physical to enable IPC-related debugging. Use undo debugging physical to disable IPC-related debugging. Syntax debugging physical chassis chassis-number slot slot-number { mbus | lipc | mbuf-relay } { all | error | event | input | output } undo debugging physical chassis chassis-number slot slot-number { mbus | lipc | mbuf-relay } { all | error | event | input | output } Default IPC-related debugging is disabled.
Default Debugging for the card system is disabled. Views Probe view Predefined user roles network-admin network-operator Parameters if-name: Specifies an interface or controller by its name. card: Specifies the card system. all: Specifies all types of debugging. error: Specifies error debugging. event: Specifies event debugging. packet: Specifies packet debugging. Usage guidelines Debugging compromises system performance. To troubleshoot the router, enable only required debugging functions.
ioctl: Specifies the ioctl submodule of the switching module. mac: Specifies the MAC submodule of the switching module. mc: Specifies the multicast submodule of the switching module. ni: Specifies the NI submodule of the switching module. port: Specifies the port submodule of the switching module. proto: Specifies the protocol submodule of the switching module. psec: Specifies the port security submodule of the switching module. qos: Specifies the QoS submodule of the switching module.
event: Specifies event debugging. packet: Specifies packet debugging. Usage guidelines Outputting the debugging information affects system operation efficiency. When you diagnose a fault, use this command to enable the specified debugging, rather than all types of debugging. debugging physical poe Use debugging physical poe to enable PoE module debugging. Use undo debugging physical poe to disable PoE module debugging.
Default Fax debugging is disabled for a voice interface Views Probe view Predefined user roles network-admin network-operator Parameters if-name: Specifies a voice interface. type: Specifies one of the following debugging types: • all: Specifies all fax debugging.
debugging system internal adj6 Use debugging system internal adj6 to enable IPv6 adjacency entry debugging. Use undo debugging system internal adj6 to remove the configuration. Syntax debugging system internal adj6 { hardware | bind | notify | entry } undo debugging system internal adj6 { hardware | bind | notify | entry } Default IPv6 adjacency debugging is disabled. Views Probe view Predefined user roles network-admin Parameters hardware: Specifies IPv6 adjacency entry hardware debugging.
undo debugging system internal arp features { notify | packet } Default ARP features debugging is disabled. Views Probe view Predefined user roles network-admin Parameters notify: Enables notification debugging for ARP features. packet: Enables packet debugging for ARP features. debugging system internal arp notify Use debugging system internal arp notify to enable ARP notification debugging. Use undo debugging system internal arp notify to disable ARP notification debugging.
debugging system internal fib prefix Use debugging system internal fib prefix to enable FIB debugging. Use undo debugging system internal fib prefix to disable FIB debugging.
Views Probe view Predefined user roles network-admin Parameters all: Enables all debugging. message: Enables message debugging. The output displays VN entries that are sent by routers and synchronized by cards. hardware: Enables hardware debugging. The output displays information sent to drivers and information returned by drivers. bind: Enables bind debugging. The output displays information about prefix-bound VN and VN-bound adjacency table/next hop label forwarding entry (NHLFE).
group-address: Specifies a multicast group address. If this argument is not specified, this command outputs trace logs for all multicast groups. source-address: Specifies a multicast source address. If this argument is not specified, this command outputs trace logs for all multicast sources. slot slot-number: Specifies a card by its slot number. If no card is specified, this command outputs trace logs for all cards. (MSR4000.
Default IPv6 FIB prefix debugging is disabled. Views Probe view Predefined user roles network-admin Parameters all: Enables all types of IPv6 FIB prefix debugging. message: Enables IPv6 FIB prefix message debugging. If you specify this keyword, the system displays the IPv6 FIB prefix obtained from the routing table or synchronized from other cards or devices. hardware: Enables IPv6 FIB prefix hardware debugging.
slot slot-number: Specifies a card. The slot-number argument represents the number of the slot that holds the card. (MSR4000.) debugging system internal mld-snooping fsm tracing Use debugging system internal mld-snooping fsm tracing to enable trace log debugging for the MLD snooping state machine. Use undo debugging system internal mld-snooping fsm tracing to disable trace log debugging for the MLD snooping state machine.
debugging system internal mpls forwarding protection { all | error | process } undo debugging system internal mpls forwarding protection { all | error | process } MSR4000: debugging system internal mpls forwarding protection { all | error | process } slot slot-number undo debugging system internal mpls forwarding protection { all | error | process } slot slot-number Default Debugging for MPLS forwarding plane protection switching is disabled.
config: Specifies MPLS LFIB configuration debugging. ilm: Specifies MPLS LFIB ILM debugging. message: Specifies MPLS LFIB message debugging. nhlfe: Specifies MPLS LFIB NHLFE debugging. sync: Specifies MPLS LFIB synchronization debugging. slot slot-number: Specifies a card. The slot-number argument represents the number of the slot that holds the card. (MSR4000.) debugging system internal nd Use debugging system internal nd to enable ND debugging.
Parameters all: Specifies all STG debugging information. bind: Specifies STG VLAN mapping debugging information. error: Specifies STG error debugging information. map: Specifies STG-to-STI mapping debugging information. state: Specifies STG status debugging information. tc: Specifies TC event debugging information. debugging system internal stp Use debugging system internal stp to enable outputting IPC debugging information for STP.
Parameters all: Enables all types of debugging for VLANs. error: Enables error debugging for VLANs. event: Enables event debugging for VLANs. execution: Enables execution debugging for VLANs. hardware: Enables hardware debugging for VLANs. display fastforward session table Use display fastforward session table to display session entries that are not processed by security services. The security services on the device include NAT, ASPF, connection limit, and APR.
Syntax display hardware internal access-space slot-num acc-addr width-num Views Probe view Predefined user roles network-admin network-operator Parameters slot-num: Specifies a slot number. It must be 0 for an MSR2000 or MSR3000, and must be in the range of 0 to 2 for an MSR4000. acc-addr: Specifies the hardware space in the range of 0 to 0xFFFFFFFFFFFFFFFF. width-num: Specifies the PCI configuration access bit width in bytes. Valid values include 1, 2, 4, and 8.
Views Probe view Predefined user roles network-admin network-operator Parameters if-name: Specifies a voice interface. dsp-num: Specifies a DSP by its number in the range of 0 to 15. dsp-addr: Specifies a DSP memory address in the range of 0x00000 to 0x27FFF. Usage guidelines The DSP numbers and addresses vary with different voice cards. Use the correct DSP number and address to view DSP memory information.
Views Probe view Predefined user roles network-admin network-operator Parameters if-name: Specifies an interface by its name. chip-num: Specifies a chip by its number in the range of 0x00 to 0xFF. acltable: Displays ACL entry information. cpuport: Displays CPU port information. devicemap: Displays device mapping table information. multicasttable: Displays multicast entry information. meter: Displays chip rule information. mirror: Displays mirroring group information.
Views Probe view Predefined user roles network-admin network-operator Parameters subslot-num: Specifies a subslot by its number in the range of 0 to 255. start-index: Specifies the start index number in the range of 0 to 65535. total-num: Specifies the total number of ACL entries in the range of 0 to 65535. chip-num: Specifies the chip number in the range of 0 to 31. display hardware internal dump lsw mactable Use display hardware internal dump lsw mactable to display MAC address entry information.
Predefined user roles network-admin network-operator Parameters subslot-num: Specifies a subslot by its number in the range of 0 to 255. vlan-id: Specifies a VLAN by its ID in the range of 0 to 4095. display hardware internal dump slot inner-port Use display hardware internal dump slot inner-port to display register information about a specified internal interface or all internal interfaces in a slot.
chip-num: Specifies a chip by its number in the range of 0 to 255. statistics: Displays statistics for the specified chip. txbd: Displays the transmit buffer description. rxbd: Displays the receive buffer description. keyregs: Displays addresses and values of the key registers. priv-info: Displays private information. display hardware internal pcicfg Use display hardware internal pcicfg to display the contents of the PCI configuration space, including the contents of the PCI-E configuration space.
Views Probe view Predefined user roles network-admin network-operator Parameters interface-type: Specifies a serial interface. interface-number: Specifies a serial interface by its number. tx_queue: Displays transmit queues. rx_queue: Displays receive queues. display hardware internal physical Use display hardware internal physical to display the dump software information.
Predefined user roles network-admin network-operator Parameters interface-type: Specifies a CPOS interface. interface-number: Specifies a CPOS interface by its number. isrque: Displays interruption queues. display hardware internal physical lsw Use display hardware internal physical lsw to display internal information for the switching module.
Views Probe view Predefined user roles network-admin network-operator Parameters vlan-id: Specifies a VLAN by its ID in the range of 0 to 4095. display hardware internal physical mgf Use display hardware internal physical mgf to display information about the specified interface on the MGF.
Views Probe view Predefined user roles network-admin network-operator Parameters slot-num: Specifies a slot by its number. display hardware internal physical poe debugging Use display hardware internal physical poe debugging to display the enabled PoE module debugging.
Views Probe view Predefined user roles network-admin network-operator 29
Tunneling probe commands display hardware internal transceiver register interface Use display hardware internal transceiver register interface to display the content of a register area on a transceiver module.
Syntax MSR2000/MSR3000: display system internal acl [ ipv6 ] { acl-number | name acl-name } MSR4000: display system internal acl [ ipv6 ] { acl-number | name acl-name } { slot slot-number } Views Probe view Predefined user roles network-admin Parameters acl-number: Specifies the number of an ACL: • • 2000 to 2999 for the following ACLs: { IPv4 basic ACLs if the ipv6 keyword is not specified. { IPv6 basic ACLs if the ipv6 keyword is specified.
display system internal adj4 entry Use display system internal adj4 entry to display detailed information about an IPv4 adjacency entry. Syntax MSR2000/MSR3000: display system internal adj4 entry ip-address interface interface-type interface-number MSR4000: display system internal adj4 entry ip-address interface interface-type interface-number slot slot-number Views Probe view Predefined user roles network-admin Parameters ip-address: Displays the IPv4 adjacency entry about the specified IP address.
MSR4000: display system internal adj6 entry ipv6-address interface interface-type interface-number slot slot-number Views Probe view Predefined user roles network-admin Parameters ipv6-address: Displays the IPv6 adjacency entry about the specified IPv6 address. interface interface-type interface-number: Specified an interface by its type and number. slot slot-number: Specifies a card by its slot number. (MSR4000.
count: Displays the number of IPv4 adjacency entries. verbose: Displays detailed IPv4 adjacency entry information. display system internal arp Use display system internal arp to display ARP entries that are not synchronized from other cards or devices.
display system internal arp ip-address Use display system internal arp ip-address to display the ARP entry for a specific IP address. Syntax MSR4000: display system internal arp ip-address slot slot-number Views Prove view Predefined user roles network-admin Parameters ip-address: Displays the ARP entry for the specified IP address. slot slot-number: Specifies a card by its slot number. (MSR4000.) display system internal arp machash Use display system internal arp machash to display machash entries.
Views Probe view Predefined user roles network-admin Parameters slot slot-number: Specifies a card by its slot number. (MSR4000.) display system internal arp reload Use display system internal arp reload to display ARP reload link entries. Syntax MSR2000/MSR3000: display system internal arp reload MSR4000: display system internal arp reload slot slot-number Views Probe view Predefined user roles network-admin Parameters slot slot-number: Specifies a card by its slot number. (MSR4000.
Syntax MSR2000/MSR3000: display system internal arp statistics MSR4000: display system internal arp statistics slot slot-number Views Probe view Predefined user roles network-admin Parameters slot slot-number: Specifies a card by its slot number. (MSR4000.) display system internal arp vlan Use display system internal arp vlan to display ARP entries for a specific VLAN.
Syntax MSR2000/MSR3000: display system internal bgp instance { ipv4 | ipv6 | vpnv4 } [ vpn-instance vpn-instance-name ] [ rib | send ] statistics display system internal bgp instance { l2vpn | vpnv6 } [ rib | send ] statistics display system internal bgp instance ipv4 mdt [ rib | send ] statistics display system internal bgp instance { ipv4 | ipv6 } multicast [ rib | send ] statistics MSR4000: display system internal bgp instance { ipv4 | ipv6 | vpnv4 } [ vpn-instance vpn-instance-name ] [ rib | send ] stat
display system internal bgp interface Use display system internal bgp interface to display BGP interface information.
Parameters route-distinguisher route-distinguisher: Specifies a route distinguisher (RD), a string of 3 to 21 characters. You can specify an RD in one of the following formats: • 16-bit AS number:32-bit user-defined number, such as 101:3. • 32-bit IP address:16-bit user-defined number, such as 192.168.122.15:1. • 32-bit AS number:16-bit user-defined number, such as 65536:1. In this format, the minimum value for the AS number is 65536. pe-address ip-address: Specifies a PE by its IP address.
Parameters route-distinguisher route-distinguisher: Specifies a route distinguisher (RD), a string of 3 to 21 characters. You can specify an RD in one of the following formats: • 16-bit AS number:32-bit user-defined number, such as 101:3. • 32-bit IP address:16-bit user-defined number, such as 192.168.122.15:1. • 32-bit AS number:16-bit user-defined number, such as 65536:1. In this format, the minimum value for the AS number is 65536. site-id site-id: Specifies a site by its ID.
Parameters ipv4: Displays BGP next hop information for IPv4 address family. ipv6: Displays BGP next hop information for IPv6 address family. nib-id: Specifies a next hop by its ID in the range of 1 to FFFFFFFF. If you do not specify a next hop, this commands displays information about all BGP next hops. verbose: Displays detailed next hop information. If you do not specify this keyword, this command displays brief next hop information.
display system internal bgp peer ipv4 multicast ipv4-address [ rib | send | session ] statistics [ standby slot slot-number ] display system internal bgp peer ipv6 multicast ipv6-address [ rib | send | session ] statistics [ standby slot slot-number ] Views Probe view Predefined user roles network-admin Parameters ipv4: Displays BGP peer statistics for IPv4 address family. ipv6: Displays BGP peer statistics for IPv6 address family. vpnv4: Displays BGP peer statistics for VPNv4 address family.
Views Probe view Predefined user roles network-admin Parameters calc: Displays statistics for the BGP route comparison module. rib: Displays statistics for the BGP route module. send: Displays statistics for the BGP sending module. session: Displays statistics for the BGP session module. standby: Displays BGP module statistics for a standby BGP process. If you do not specify a standby BGP process, the command displays BGP module statistics for the active BGP process.
display system internal bgp routing-table ipv4 multicast network-address { mask | mask-length } advertise-info [ standby slot slot-number ] display system internal bgp routing-table ipv6 multicast network-address prefix-length advertise-info [ standby slot slot-number ] Views Probe view Predefined user roles network-admin Parameters ipv4: Displays BGP route advertisement information for IPv4 address family. ipv6: Displays BGP route advertisement information for IPv6 address family.
MSR4000: display system internal bgp routing-table ipv4 [ vpn-instance vpn-instance-name ] network-address { mask | mask-length } verbose [ standby slot slot-number ] display system internal bgp routing-table ipv6 [ vpn-instance vpn-instance-name ] network-address prefix-length verbose [ standby slot slot-number ] display system internal bgp routing-table vpnv4 network-address { mask | mask-length } verbose [ standby slot slot-number ] display system internal bgp routing-table vpnv6 network-address prefix-l
Syntax display system internal control-plane management statistics Views Probe view Predefined user roles network-admin display system internal control-plane statistics Use display system internal control-plane statistics to display the statistics for the control plane.
display system internal ethernet character Use display system internal ethernet character to display the statistics and details of characteristics monitored by the Ethernet module.
display system internal ethernet controlblock interface { interface-type interface-number } slot slot-number Views Probe view Predefined user roles network-admin Parameters interface interface-type interface-number: Specifies an interface by its type and number. slot slot-number: Specifies the slot that houses the card by its number. (MSR4000.) display system internal fib prefix Use display system internal fib prefix to display brief information about IPv4 FIB prefixes.
display system internal fib prefix [vpn-instance vpn-instance-name] entry-status status slot slot-number Views Probe view Predefined user roles network-admin Parameters vpn-instance vpn-instance-name: Displays the IPv4 FIB prefixes that fail to be set to the driver or are aging for the specified VPN instance. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If you do not specify any VPN, the command displays brief information about IPv4 FIB prefix for the public network.
Syntax MSR2000/MSR3000: display system internal fib running-status MSR4000: display system internal fib running-status slot slot-number Views Probe view Predefined user roles network-admin Parameters slot slot-number: Specifies a card by its slot number. (MSR4000.) display system internal fib statistics Use display system internal fib statistics to display statistics about the IPv4 FIB, IPv6 FIB, and VN.
Views Probe view Predefined user roles network-admin Parameters id id: Displays VN entry information for the specified VN ID. index index: Displays VN entry information for the specified VN index. next-hop next-hop: Displays VN entry information for the specified next hop. An IPv4 or IPv6 address can be entered in this parameter. slot slot-number: Specifies a card by its slot number. (MSR4000.
Views Probe view Predefined user roles network-admin Parameters id id: Displays information about VN references for the specified VN ID. index index: Displays information about VN references for the specified VN index. reference: Displays information about the prefix of the VN reference. slot slot-number: Specifies a card by its slot number. (MSR4000.
display system internal ha statistics Use display system internal ha statistics to display HA submodule statistics. Syntax display system internal ha statistics { submodule { fsm | service } | summary } Views Probe view Predefined user roles network-admin Parameters submodule: Specifies an HA submodule. fsm: Specifies the FSM submodule. service: Specifies the service submodule. summary: Displays the global statistics.
Views Probe view Predefined user roles network-admin Parameters slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command displays the registered down types on the MPU. (MSR4000.) display system internal ifmgr entry Use display system internal ifmgr entry to display data structure information for an interface.
Parameters para: Specifies an event type or interface type. If you specify both an event type and an interface type, connect them by using an asterisk (*) in the form of event*type. slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command displays interface event register information on the MPU. (MSR4000.) help: Displays help information for valid parameters that you can specify.
Parameters para: Specifies an interface index in decimal format. slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command displays interface index information for the MPU. (MSR4000.) help: Displays help information for valid parameters that you can specify. display system internal ifmgr list Use display system internal ifmgr list to display the name and index of each interface.
Parameters para: Specifies the full name or abbreviated name of an interface. If you do not specify this argument, the command displays tree structures such as interface indexes, interface numbers, and help information for all interfaces. slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command displays tree structures such as interface indexes, interface numbers, and help information for the interfaces on the MPU. (MSR4000.
Predefined user roles network-admin Parameters ip-address ip-address: Specifies an IP address. vpn-instance vpn-instance-name: Specifies the VPN to which an IP address belongs. interface interface-type interface-number: Specifies an interface by its type and number. slot slot-number: Specifies a card by its slot number. (MSR4000.) Usage guidelines If you do not specify any parameters, this command displays detailed information about all IPv4 addresses for the public network.
MSR4000: display system internal ip source binding [ static | [ vpn-instance vpn-instance-name ] [ dot1x | dhcp-relay | dhcp-server | dhcp-snooping ] ] [ ip-address ip-address ] [ mac-address mac-address ] [ vlan vlan-id ] [ interface interface-type interface-number ] [ slot slot-number ] Views Probe view Predefined user roles network-admin Parameters static: Specifies static IPv4 source guard binding entries.
Predefined user roles network-admin Parameters slot slot-number: Specifies a card. The slot-number argument represents the number of the slot that holds the card. (MSR4000.) display system internal ip vpn-instance Use display system internal ip vpn-instance to display VPN instance information for the system kernel.
display system internal ip vpn-instance statistics MSR4000: display system internal ip vpn-instance statistics slot slot-number Views Probe view Predefined user roles network-admin Parameters slot slot-number: Specifies a card. The slot-number argument represents the number of the slot that holds the card. (MSR4000.) display system internal ipv6 address Use display system internal ipv6 address to display IPv6 address detailed information.
display system internal ipv6 adjacent-table slot slot-number [ count | verbose ] Views Probe view Predefined user roles network-admin Parameters slot slot-number: Specifies the card by its slot number. (MSR4000.) count: Displays the number of IPv6 adjacency entries. verbose: Displays detailed IPv6 adjacency entry information.
display system internal ipv6 fast-forwarding statistics Use display system internal ipv6 fast-forwarding statistics to display IPv6 fast forwarding statistics. Syntax MSR2000/MSR3000: display system internal ipv6 fast-forwarding statistics MSR4000: display system internal ipv6 fast-forwarding statistics [ slot slot-number ] Views Probe view Predefined user roles network-admin Parameters slot slot-number: Display IPv6 fast forwarding statistics for a card.
Syntax MSR2000/MSR3000: display system internal ipv6 fib prefix entry-status status [ vpn-instance vpn-instance-name ] MSR4000: display system internal ipv6 fib prefix entry-status status [ vpn-instance vpn-instance-name ] [ slot slot-number ] Views Probe view Predefined user roles network-admin Parameters vpn-instance vpn-instance-name: Displays the IPv6 FIB prefixes that fail to be set to the driver or that are aging for the specified VPN instance.
slot slot-number: Specifies a card by its slot number. (MSR4000.) display system internal ipv6 l2-multicast ip forwarding verbose Use display system internal ipv6 l2-multicast ip forwarding verbose to display detailed information about IPv6 forwarding entries for IPv6 Layer 2 multicast.
Predefined user role network-admin Parameters group ipv6-group-address: Specifies an IPv6 multicast group. If this option is not specified, this command displays detailed information about all IPv6 multicast groups. source ipv6-source-address: Specifies an IPv6 multicast source. If this option is not specified, , this command displays detailed information about IPv6 multicast groups with all IPv6 multicast sources. vlan vlan-id: Specifies a VLAN by its ID.
Views Probe view Predefined user role network-admin Parameters mac-address: Specifies a MAC multicast group. If this argument is not specified, this command displays detailed information about the MAC forwarding entries for all MAC multicast groups. vlan vlan-id: Specifies a VLAN by its ID. The value range for the vlan-id argument is 1 to 4094. If you do not specify any VLAN, this command displays detailed information about the MAC forwarding entries for all VLANs.
MSR4000: display system internal ipv6 max-ecmp-num [ slot slot-number ] Views Probe view Predefined use rules network-admin Parameters slot slot-number: Display the maximum number of IPv6 ECMP routes for a card. The slot-number argument specifies the slot number of the card. If you do not specify a card, the MPU is specified. (MSR4000.
interface interface-type interface-number: Specifies an interface by its type and number. source ipv6-source-address: Specifies an IPv6 source address. If this option is not specified, this command does not display IPv6 MBR entries. group ipv6-group-address: Specifies an IPv6 multicast group address in the range of FFxy::/16, where "x" and "y" represent any hexadecimal numbers from 0 to F. The IPv6 multicast group address cannot be FFx0::/16, FFx1::/16, FFx2::/16, or FF0y::.
Syntax MSR2000/MSR3000: display system internal ipv6 multicast [ vpn-instance vpn-instance-name ] forwarding-table dummy [ ipv6-source-address [ prefix-length ] | ipv6-group-address [ prefix-length ] | statistics ] * MSR4000: display system internal ipv6 multicast [ vpn-instance vpn-instance-name ] forwarding-table dummy [ ipv6-source-address [ prefix-length ] | ipv6-group-address [ prefix-length ] | statistics | slot slot-number ] * Views Probe view Predefined user role network-admin Parameters vpn-inst
Views Probe view Predefined user role network-admin Parameters vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. If this option is not specified, this command displays detailed information about the IPv6 multicast forwarding entries on the public network. ipv6-source-address: Specifies an IPv6 multicast source address.
MSR4000: display system internal ipv6 multicast-vlan forwarding-table verbose [ ipv6-source-address [ prefix-length ] | ipv6-group-address [ prefix-length ] | slot slot-number | subvlan vlan-id | vlan vlan-id ] * Views Probe view Predefined user role network-admin Parameters ipv6-source-address: Specifies an IPv6 multicast source address. If this argument is not specified, this commands displays detailed information about the IPv6 multicast VLAN forwarding entries for all IPv6 multicast sources.
all: Displays all Path MTU information for the public network. dynamic: Displays all dynamic Path MTU information. static: Displays all static Path MTU information. count: Displays the total number of Path MTU entries. slot slot-number: Specifies a card by its slot number. (MSR4000.) Usage guidelines If you do not specify any parameters, the command displays all Path MTU information for the public network.
Views Probe view Predefined user roles network-admin Parameters policy policy-name: Specifies a policy by its name, a case-sensitive string of 1 to 19 characters. setup: Displays information about the specified IPv6 PBR policy applied to an interface. slot slot-number: Specifies a card by its slot number. (MSR4000.) display system internal ipv6 pbr policy Use display system internal ipv6 pbr policy to display IPv6 PBR policy information in user mode.
Parameters vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. If this option is not specified, this command displays interface information maintained by LIB on the public network. interface-type interface-number: Specifies an interface by its type and number. address: Specifies an IPv6 address. gateway: Specifies an IPv6 gateway address. prefix: Specifies an IPv6 address prefix. ipv6-address: Specifies an IPv6 address except ::.
display system internal ipv6 rawip Use display system internal ipv6 rawip to display brief information about IPv6 RawIP connections. Syntax MSR4000: display system internal ipv6 rawip [ slot slot-number ] Views Probe view Predefined user roles network-admin Parameters slot slot-number: Specifies a card by its slot number. (MSR4000.) display system internal ipv6 rib event attribute Use display system internal ipv6 rib event attribute to display IPv6 RIB attribute events.
Predefined user roles network-admin display system internal ipv6 rib event protocol Use display system internal ipv6 rib event protocol to display IPv6 RIB protocol events. Syntax display system internal ipv6 rib event protocol [ vpn-instance vpn-instance-name ] Views Probe view Predefined user roles network-admin Parameters vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters.
Views Probe view Predefined user roles network-admin Parameters rib: Displays IPv6 RIB logs. event: Displays logs about IPv6 RIB rouging changes. reverse: Displays logs in reverse chronological order. standby slot slot-number: Displays backup IPv6 RIB logs for a card. Without this option, the command displays IPv6 RIB logs. (MSR4000.) display system internal ipv6 rib memory Use display system internal ipv6 rib memory to display IPv6 RIB memory information.
display system internal ipv6 rib prefix Use display system internal ipv6 rib prefix to display IPv6 RIB prefix information. Syntax MSR2000/MSR3000: display system internal ipv6 rib prefix ipv6-address prefix-length [ vpn-instance vpn-instance-name ] MSR4000: display system internal ipv6 rib prefix ipv6-address prefix-length [ vpn-instance vpn-instance-name ] [ standby slot slot-number ] Views Probe view Predefined user roles network-admin Parameters ipv6-address: Specifies the destination IPv6 address.
display system internal ipv6 route-direct interface Use display system internal ipv6 route-direct interface to display IPv6 interface information.
Predefined user roles network-admin Parameters reverse: Displays logs in reverse chronological order. display system internal ipv6 source binding Use display system internal ipv6 source binding to display detailed information about IPv6 source guard bindings.
Syntax MSR4000: display system internal ipv6 tcp [ slot slot-number ] Views Probe view Predefined user roles network-admin Parameters slot slot-number: Specifies a card by its slot number. (MSR4000.) display system internal ipv6 udp Use display system internal ipv6 udp to display brief information about IPv6 UDP connections.
topology topo-name: Specifies a topology by its name, a case-sensitive string of 1 to 31 characters. Without this option, the command displays redistributed routes for the public network. process-id: Specifies an IS-IS process by its ID in the range of 1 to 635535. Without this argument, the command displays routes redistributed by all IS-IS processes. standby slot slot-number: Displays backup routes redistributed by IS-IS for a card. Without this option, the command displays routes redistributed by IS-IS.
ip-address: Specifies an IP address in dotted decimal notation. mask: Specifies the IP address mask in dotted decimal notation. mask-length: Specifies the mask length, an integer in the range of 0 to 32. display system internal isis interface ipv6 Use display system internal isis interface ipv6 to display IPv6 IS-IS interface information.
Syntax display system internal isis nib ipv6 [ nib-id ] [ verbose ] Views Probe view Predefined user roles network-admin Parameters nib-id: Specifies a next hop by its ID in the range of 1 to FFFFFFFF. Without this argument, the command displays information about all next hops. verbose: Displays detailed IPv6 IS-IS next hop information. Without this keyword, the command displays brief IPv6 IS-IS next hop information.
level-1: Displays IS-IS Level-1 prefix information. If no level is specified, the command displays both Level-1 and Level-2 prefix information. level-2: Displays IS-IS Level-2 prefix information. If no level is specified, the command displays both Level-1 and Level-2 prefix information. prefix mask-length: Specifies a prefix and the mask length. process-id: Specifies an IS-IS process by its ID in the range of 1 to 635535.
Predefined user roles network-admin display system internal kernel memory dump Use display system internal kernel memory dump to display kernel memory contents with the specified length starting from a specific kernel memory address.
Views Probe view Predefined user roles network-admin Parameters name name-string: Specifies a kernel memory pool by its name. If you specify only this option, the command displays brief usage information for the specified kernel memory pool. tag tag-value: Specifies a kernel memory pool or kernel memory pools by a tag. If you specify only the tag keyword, the command displays brief usage information for all tagged kernel memory pools.
vlan vlan-id: Specifies a VLAN by its ID. The value range for the vlan-id argument is 1 to 4094. If you do not specify any VLAN, this command displays detailed information about IP multicast forwarding entries for all VLANs. slot slot-number: Specifies a card by its slot number. If no card is specified, this command displays detailed information about IP multicast forwarding entries for the MPU. (MSR4000.
Predefined user role network-admin Parameters slot slot-number: Specifies a card by its slot number. If no card is specified, this command displays IPC statistics for the MPU. (MSR4000.) display system internal l2-multicast mac forwarding verbose Use display system internal l2-multicast mac forwarding verbose to display detailed information about the MAC forwarding entries for Layer 2 multicast.
Predefined user role network-admin Parameters mac-address: Specifies a MAC multicast group. If this argument is not specified, this command displays detailed information about all MAC multicast groups. vlan vlan-id: Specifies a VLAN by its ID. The value range for the vlan-id argument is 1 to 4094. If you do not specify any VLAN, this command displays detailed information about the MAC multicast groups for all VLANs. slot slot-number: Specifies a card by its slot number.
MSR4000: display system internal l2vpn l2vfib statistics slot slot-number Views Probe view Predefined user roles network-admin Parameters slot slot-number: Specifies a card. The slot-number argument represents the number of the slot that holds the card. (MSR4000.) display system internal l2vpn ldp Use display system internal l2vpn ldp to display information about the LDP PW labels of a backup LDP process.
Syntax MSR2000/MSR3000: display system internal link-aggregation global MSR4000: display system internal link-aggregation slot slot-number cpu cpu-number global Views Probe view Predefined user roles network-admin Parameters slot-number: Specifies a card by its slot number. (MSR4000.) cpu cpu-number: Specifies a CPU by its number. (MSR4000.) display system internal link-aggregation interface Use display system internal link-aggregation interface to display aggregate interface information.
lacppdu: Displays statistics for LACPDUs. slot-number: Specifies a card by its slot number. (MSR4000.) cpu cpu-number: Specifies a CPU by its number. (MSR4000.) Usage guidelines If none of the kernel, lacp, lacppdu, and statistics keywords are specified, this command displays the interface information in the main thread. Part of the information that is displayed overlaps because the information is saved in separate threads. You can use the overlapping information for problem location and analysis.
display system internal lipc lgmp group-list Use display system internal lipc lgmp group-list to display the number of created multicast groups, the number of multicast member ports, and HASH information. Syntax display system internal lipc lgmp group-list [ lip lip ] Default This command displays the number of created multicast groups, the number of multicast member ports, and HASH information at the local node.
Views Probe view Predefined user roles network-admin Parameters lip lip: Specifies a remote node by its ID in the range of 0 to 32767. display system internal lipc lgmp statistics Use display system internal lipc lgmp statistics to display statistics for LIPC LGMP modules. Syntax display system internal lipc lgmp statistics [ lip lip ] Default This command displays statistics for the LIPC LGMP module at the local node.
Syntax display system internal lipc loop statistics [ lip lip ] Default This command display statistics for local loops. Views Probe view Predefined user roles network-admin Parameters lip lip: Specifies a remote node by its ID in the range of 0 to 32767. display system internal lipc mtcp group Use display system internal lipc mtcp group to display member information, statistics, or state machine history for an LIPC multicast group.
Views Probe view Predefined user roles network-admin Parameters lip lip: Specifies a remote node by its ID in the range of 0 to 32767. Usage guidelines Before you use this command to display information about LIPC multicast performance, first enable performance statistics for LIPC multicast connections by using the lipc performance command. display system internal lipc mtcp statistics Use display system internal lipc mtcp statistics to display information about LIPC multicast connections.
Syntax display system internal lipc pcb statistics [ lip lip ] Default This command displays global statistics for the LIPC PCB module at the local node. Views Probe view Predefined user roles network-admin Parameters lip lip: Specifies a remote node by its ID in the range of 0 to 32767. display system internal lipc physical Use display system internal lipc physical to display global statistics for the driver adaptation layer.
Predefined user roles network-admin Parameters lip lip: Specifies a remote node by its ID in the range of 0 to 32767. Usage guidelines This command is used for examine whether the PUBLISH module at a node encounters an out-of-order problem. display system internal lipc publish statistics Use display system internal lipc publish statistics to display statistics for LIPC PUBLISH modules.
Usage guidelines This command displays information about LIPC unicast events, including connection, DACK, destruction, and time sequence exchange. HP recommends that you use this command for troubleshooting when you find any problem with LIPC unicast. Use this command before the system resources are used up. When the system resources are used up, old information is replaced by new information.
singledetail lport rport: Specifies a local port number and a remote port number. The value range for the port numbers is 0 to 65535. lip lip: Specifies a remote node by its ID in the range of 0 to 32767. display system internal lipc stcp performance Use display system internal lipc stcp performance to display information about LIPC unicast performance.
display system internal lipc stcp status Use display system internal lipc stcp status to display unicast transmission state information, including sequence number, ACK sequence number, send flag, and receive flag of the unicast packets. Syntax display system internal lipc stcp status { recv | send } [ lip lip ] Views Probe view Predefined user roles network-admin Parameters recv: Specifies the receiving end. send: Specifies the sending end.
Syntax display system internal lipc sudp pcb-info { all-port | global-port | local-port | specific-port portID } [ lip lip ] Default This command displays the detailed PCB information of the SUDP module at the local node. Views Probe view Predefined user roles network-admin Parameters all-port: Specifies all ports. global-port: Specifies all global well-known ports. local-port: Specifies the local well-known ports. specific-port portID: Specifies a port number in the range of 0 to 65535.
Views Probe view Predefined user roles network-admin Parameters lip lip: Specifies a remote node by its ID in the range of 0 to 32767. display system internal lipc topology history Use display system internal lipc topology history to display the change history of topology links. Syntax display system internal lipc topology history [ lip lip ] Default This command displays the change history of topology links at the local node.
Default This command displays statistics for topology nodes related to the local node. Views Probe view Predefined user roles network-admin Parameters node nodeID: Specifies a node by its ID in the range of 0 to 32767. lip lip: Specifies a remote node by its ID in the range of 0 to 32767. Usage guidelines The statistics includes the number events that occurred on the local node, and the latest six time records (with a precision to 0.1 milliseconds) of each event.
Predefined user roles network-admin Parameters lip lip: Specifies a remote node by its ID in the range of 0 to 32767. display system internal lipc topology status Use display system internal lipc topology status to display topology status. Syntax display system internal lipc topology status [ lip lip ] Default This command displays topology status at the local node. Views Probe view Predefined user roles network-admin Parameters lip lip: Specifies a remote node by its ID in the range of 0 to 32767.
count: Displays the total number of MAC address entries that match all entry attributes you specify in the command. If no entry attribute is specified, the command displays the total number of entries in the MAC address table. If this keyword is not specified, the command displays detailed information about specified MAC address entries. slot slot-number: Specifies a card by its slot number. (MSR4000.
Syntax MSR2000/MSR3000: display system internal mbuf statistics MSR4000: display system internal mbuf statistics slot slot-number Views Probe view Predefined user roles network-admin Parameters slot slot-number: Specifies a card by its slot number. (MSR4000.) display system internal mpls forwarding temporary-ilm Use display system internal mpls forwarding temporary-ilm to display temporary ILM entries.
Views Probe view Predefined user roles network-admin Parameters label: Specifies an incoming label. slot slot-number: Specifies a card. The slot-number argument represents the number of the slot that holds the card. (MSR4000.) display system internal mpls lfib nhlfe Use display system internal mpls lfib nhlfe to display detailed MPLS NHLFE information.
Parameters nid: Specifies an NHLFE entry index. slot slot-number: Specifies a card. The slot-number argument represents the number of the slot that holds the card. (MSR4000.) display system internal mpls lfib record Use display system internal mpls lfib record to display information recorded by the MPLS LFIB module, including information received by MPLS LFIB, information LFIB set to the driver, and information returned from the driver.
Parameters slot slot-number: Specifies a card. The slot-number argument represents the number of the slot that holds the card. (MSR4000.) display system internal mpls lsp-pending Use display system internal mpls lsp-pending to display information about LSPs not deployed to the forwarding plane during the GR process of LDP, BGP, or RSVP.
Views Probe view Predefined user roles network-admin display system internal mrib interface statistics Use display system internal mrib interface statistics to display statistics for the interfaces that are maintained by the MRIB, including interfaces that are configured with multicast protocols, register interfaces, InLoopBack0 interfaces, and null0 interfaces.
display system internal multicast capability Use display system internal multicast capability to display multicast capability. Syntax MSR2000/MSR3000: display system internal multicast capability MSR4000: display system internal multicast capability [ slot slot-number ] Views Probe view Predefined user role network-admin Parameters slot slot-number: Specifies a card by its slot number. If no card is specified, this command displays multicast capability for the MPU. (MSR4000.
slot slot-number: Specifies a card by its slot number. If no card is specified, this command displays mappings between outgoing VLAN interfaces and Layer 2 multicast entries for the MPU. (MSR4000.) display system internal multicast forwarding-table dummy Use display system internal multicast forwarding-table dummy to display temporary multicast forwarding entries.
display system internal multicast [ vpn-instance vpn-instance-name ] forwarding-table verbose [ group-address [ mask { mask-length | mask } ] | source-address [ mask { mask-length | mask } ] | incoming-interface interface-type interface-number | outgoing-interface { exclude | include | match } interface-type interface-number ] * MSR4000: display system internal multicast [ vpn-instance vpn-instance-name ] forwarding-table verbose [ group-address [ mask { mask-length | mask } ] | source-address [ mask { mask
display system internal multicast record Use display system internal multicast record to display operation records about multicast entries.
add-l2-mac: Specifies the operation to add Layer 2 MAC multicast entries. add-l2-mac-port: Specifies the operation to add ports to Layer 2 MAC multicast entries. add-l2-mac-slot: Specifies the operation to install a card. Card information is then added to Layer 2 MAC multicast entries. add-l3-ipm: Specifies the operation to add Layer 3 multicast entries. add-l3-oif: Specifies the operation to add outgoing interfaces to Layer 3 multicast entries.
display system internal multicast-vlan forwarding-table verbose [ group-address [ mask { mask-length | mask } ] | source-address [ mask { mask-length | mask } ] | slot slot-number | subvlan vlan-id | vlan vlan-id ] * Views Probe view Predefined user role network-admin Parameters group-address: Specifies a multicast group address in the range of 224.0.0.0 to 239.255.255.255.
display system internal nd entry Use display system internal nd entry to display ND entries. Syntax MSR2000/MSR3000: display system internal nd entry MSR4000: display system internal nd entry [ slot slot-number ] Views Probe view Predefined user roles network-admin Parameters slot slot-number: Specifies a card by its slot number. (MSR4000.) display system internal nd ifcb Use display system internal nd ifcb to display ND control block information for an interface.
Views Probe view Predefined user roles network-admin Parameters vlan vlan-id: Displays ND machash entries for the specified VLAN. ip-address: Displays ND machash entries for the specified IP address. slot slot-number: Specifies a card by its slot number. (MSR4000.) display system internal nd probe Use display system internal nd probe to display ND probe link information.
display system internal nd static Use display system internal nd static to display static ND entries. Syntax display system internal nd static ipv6-address interface interface-type interface-number Views Probe view Predefined user roles network-admin Parameters ipv6-address: Displays static ND entries for a specified IPv6 address. interface interface-type interface-number: Specifies an interface by its type and number.
Predefined user roles network-admin Parameters gr: Displays GR logs. ha: Displays HA event processing logs. interface: Displays interface event logs. nib: Displays NIB logs. notify: Displays interface notification logs. upgrade: Displays smooth upgrade logs. standby slot slot-number: Displays backup OSPF logs for a card. Without this option, the command displays OSPF logs. (MSR4000.) display system internal ospf interface Use display system internal ospf interface to display OSPF interface information.
Predefined user roles network-admin Parameters process-id: Specifies an OSPF process by its ID in the range of 1 to 65535. Without this argument, the command displays interface information for all OSPF processes. interface-type interface-number: Specifies an interface by its type and number. verbose: Displays detailed OSPF interface information. standby slot slot-number: Displays backup OSPF interface information for a card. Without this option, the command displays OSPF interface information. (MSR4000.
Parameters process-id: Specifies an OSPF process by its ID in the range of 1 to 65535. Without this argument, the command displays LSDB information for all OSPF processes. area area-id: Specifies an OSPF area by its ID, which is an IP address or a decimal integer in the range of 0 to 4294967295 that is translated into the IP address format. Without this option, the command displays LSDB information for all OSPF areas. brief: Displays brief LSDB information.
Syntax MSR4000: display ospf [ process-id ] peer [ verbose ] [ interface-type interface-number ] [ neighbor-id ] standby slot slot-number Views Probe view Predefined user roles network-admin Parameters process-id: Specifies an OSPF process by its ID in the range of 1 to 65535. Without this argument, the command displays neighbor information for all OSPF processes. verbose: Displays detailed neighbor information. Without this keyword, the command displays brief OSPF neighbor information.
Views Probe view Predefined user roles network-admin Parameters process-id: Specifies an OSPF process by its ID in the range of 1 to 65535. Without this argument, the command displays prefix information for all OSPF processes. ip-address: Specifies the destination IP address. Without this argument, the command displays all prefix information. mask: Specifies the IP address mask in dotted decimal notation. mask-length: Specifies the mask length, an integer in the range of 0 to 32.
display system internal ospfv3 event-log Use display system internal ospfv3 event-log to display OSPFv3 log information. Syntax display system internal ospfv3 event-log { gr | nib | rib } Views Probe view Predefined user roles network-admin Parameters gr: Displays GR log information. nib: Displays NIB log information. rib: Displays RIB log information. display system internal ospfv3 interface Use display system internal ospfv3 interface to display OSPFv3 interface information.
Views Probe view Predefined user roles network-admin Parameters process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535. interface-type interface-number: Specifies an interface by its type and number. verbose: Displays detailed OSPFv3 interface information. standby slot slot-number: Displays backup OSPFv3 interface information for a card. Without this option, the command displays OSPFv3 interface information. (MSR4000.
display system internal ospfv3 [ process-id ] lsdb [ { external | grace | inter-prefix | inter-router | intra-prefix | link | network | nssa | router | unknown [ type ] } [ link-state-id ] [ originate-router router-id | self-originate ] | statistics | total | verbose ] standby slot slot-number Views Probe view Predefined user roles network-admin Parameters process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535.
Predefined user roles network-admin Parameters nib-id: Specifies a next hop by its ID in the range of 1 to FFFFFFFF. verbose: Displays detailed OSPFv3 next hop information. display system internal ospfv3 peer standby Use display system internal ospfv3 peer standby to display backup OSPFv3 neighbor information.
Views Probe view Predefined user roles network-admin Parameters process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535. Without this argument, the command displays prefix information for all OSPFv3 processes. inter: Displays inter-AS prefix information. intra: Displays intra-AS prefix information. ipv6-address prefix-length: Specifies an IPv6 address. The ipv6-address argument specifies an IPv6 prefix. The prefix-length argument specifies a prefix length in the range of 0 to 128.
display system internal ospfv3 vlink standby Use display system internal ospfv3 vlink standby to display backup OSPFv3 virtual link information. Syntax MSR4000: display system internal ospfv3 [ process-id ] vlink standby slot slot-number Views Probe view Predefined user roles network-admin Parameters process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535. Without this argument, the command displays virtual link information for all OSPFv3 processes.
Syntax MSR2000/MSR3000: display system internal pbr kernel policy [ policy-name [ setup ] ] MSR4000: display system internal pbr slot slot-number kernel policy [ policy-name [ setup ] ] Default The system does not display PBR policy information in kernel mode. Views Probe view Predefined user roles network-admin Parameters policy policy-name: Specifies a policy by its name, a case-sensitive string of 1 to 19 characters. setup: Displays information about the specified PBR policy applied to an interface.
display system internal pim interface Use display system internal pim interface to display interface information maintained by LIB in the PIM process. Syntax display system internal pim [ vpn-instance vpn-instance-name ] interface [ interface-type interface-number | ip-address { mask-length | mask } ] Views Probe view Predefined user role network-admin Parameters vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters.
Views Probe view Predefined user role network-admin Parameters event: Specifies the PIM event thread. main: Specifies the PIM main thread. route: Specifies the PIM routing thread. display system internal rawip Use display system internal rawip to display brief information about RawIP connections. Syntax MSR4000: display system internal rawip slot slot-number Views Probe view Predefined user roles network-admin Parameters slot slot-number: Specifies a card by its slot number. (MSR4000.
Predefined user roles network-admin display system internal rib event prefix Use display system internal rib event prefix to display IPv4 RIB prefix events. Syntax display system internal rib event prefix Views Probe view Predefined user roles network-admin display system internal rib event protocol Use display system internal rib event protocol to display IPv4 RIB protocol events.
display system internal rib ftn Use display system internal rib ftn to display FTN entries and FTN statistics. Syntax display system internal rib ftn [ index ] [ statistics ] Views Probe view Predefined user roles network-admin Parameters index: Specifies an FTN entry by its index, a hexadecimal integer. The highest digit of the index value is fixed at 1. Without this argument, the command displays all FTN entries. statistics: Displays FTN statistics.
Parameters rib: Displays RIB logs. event: Displays logs about RIB rouging changes. reverse: Displays logs in reverse chronological order. standby slot slot-number: Displays backup RIB logs for a card. Without this option, the command displays RIB logs. (MSR4000.) display system internal rib memory Use display system internal rib memory to display RIB memory information.
display system internal rib prefix ip-address mask-length [ vpn-instance vpn-instance-name ] MSR4000: display system internal rib prefix ip-address mask-length [ vpn-instance vpn-instance-name ] [ standby slot slot-number ] Views Probe view Predefined user roles network-admin Parameters ip-address: Specifies the destination IP address. mask-length: Specifies the mask length of the IP address, in the range of 0 to 32.
Views Probe view Predefined user roles network-admin Parameters vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. If no VPN is specified, the command displays information about the public network. interface-type interface-number: Specifies an interface by its type and number. ip-address: Specifies an IP address, in dotted decimal notation. mask: Specifies the subnet mask of the IP address, in dotted decimal notation.
Syntax display system internal rip status Views Probe view Predefined user roles network-admin display system internal ripng interface Use display system internal ripng interface to display interface information.
display system internal ripng nib log Use display system internal ripng nib log to display logs of next hops for RIPng routes. Syntax display system internal ripng nib log Views Probe view Predefined user roles network-admin display system internal ripng status Use display system internal ripng status to display global RIPng status information.
display system internal route-direct log Use display system internal route-direct log to display direct route logs. Syntax display system internal route-direct { event | notify | nib } log [ reverse ] Views Probe view Predefined user roles network-admin Parameters event: Displays interface event logs. notify: Displays interface event notification logs. nib: Displays logs for direct routes next hops. reverse: Displays logs in reverse chronological order.
Parameters slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command displays the sFlow statistics on all cards. (MSR4000.) display system internal startup cache Use display system internal startup cache to display the file path of the .mdb binary configuration file used at the current startup.
Parameters instance instance-id: Specifies an MSTI ID in the range of 0 to 4094, where 0 represents the common root bridge (CIST). slot slot-number: Specifies a card by its slot number. The slot-number argument represents the slot number of the card. (MSR4000.) display system internal stp port-info Use display system internal stp port-info to display the configuration and running status of an interface in the specified instance.
display system internal tunnel data interface tunnel number [ slot slot-number ] Views Probe view Predefined user roles network-admin Parameters interface tunnel number: Specifies a tunnel interface by interface number. The specified tunnel interface must already exist. slot slot-number: Specifies a card. The slot-number argument represents the number of the slot that holds the card. (MSR4000.
interface interface-type interface-number: Displays the VLAN module information of an interface specified by its type and number. summary: Displays the summary VLAN module information. slot slot-number: Specifies a card. The slot-number argument represents the number of the slot that houses the card. (MSR4000.) dsp-capture pcm Use dsp-capture pcm to capture DSP PCM packets on a voice interface.
Parameters job job-id: Specifies a job by its ID in the range of 1 to 2147483647. A job ID uniquely identifies a process, and it does not change after the process restarts. process pid: Specifies a process by its ID in the range of 1 to 2147483647. The process ID might change after the process restarts. thread thread-id: Specifies a thread by its ID in the range of 1 to 2147483647. If you do not specify this option, all threads for the specified process are specified.
slot slot-number: Specifies a card. The slot-number argument represents the number of the slot that holds the card. (MSR4000.) lipc dump-port Use lipc dump-port to enable dumping for a unicast port. Syntax lipc dump-port port &<1-5> [ lip lip ] undo lipc dump-port [ lip lip ] Default Dumping is disabled on unicast ports.
on: Enables performance statistics. lip lip: Specifies a remote node by its ID in the range of 0 to 32767. lipc ping Use lipc ping to ping a node to examine whether the LIPC connection with the specified node is operating correctly. Syntax lipc ping lip [ length len times number ] Default The device sends a ping packet with 100 bytes up to 10 times if it does not receive any reply. Views Probe view Predefined user roles network-admin Parameters lip: Specifies a node ID in the range of 0 to 32767.
Usage guidelines If the topology module of the local node does not receive the heartbeat packets from a node in up state when the timeout time expires, it tears down all unicast and multicast connections with the node. The timeout time needs to be modified only when you use the KDB or KGDB to debug the kernel. HP recommends that you set a larger timeout time to avoid the other nodes from tearing down the connections with the node whose kernel is being debugged.
Views Probe view Predefined user roles network-admin Parameters job job-id: Specifies a job by its ID in the range of 1 to 2147483647. A job ID uniquely identifies a process, and it does not change after the process restarts. slot slot-number: Specifies a card by its slot number. If you do not specify this option, the MPU is specified. (MSR4000.) cpu cpu-number: Specifies a CPU by its number.
If a memory overwrite is detected, the system displays 128-byte memory contents starting from the 16th byte preceding the detected memory address. When more than one memory overwrite is detected, the system only records and displays 128-byte memory contents with the lowest memory address detected. Related commands memory boundary-check enable mpls lfib record size Use mpls lfib record size to set the maximum number of entries that the MPLS LFIB module records.
tunnel-interface tunnel number: Specifies the tunnel interface from which to obtain the constraints for the CSPF calculation. The number argument is the number of the tunnel interface. bandwidth [ ct0 | ct1 | ct2 | ct3 ] bandwidth-value: Specifies the bandwidth constraints for the CSPF calculation. If you do not specify a CT, the tunnel is available for CT 0. • ct0: Specifies CT 0 for the tunnel. • ct1: Specifies CT 1 for the tunnel. • ct2: Specifies CT 2 for the tunnel.
Views Probe view Predefined user role network-admin Parameters fail: Specifies to record failed operations on multicast entries. limit-value: Specifies the maximum number of operation records for multicast entries, in the range of 0 to 500000. P probe Use probe to enter probe view. Syntax probe Views System view Predefined user roles network-admin Usage guidelines In probe view, you can use commands to view system status and information and diagnose system faults.
reset system internal adj4 statistics Use reset system internal adj4 statistics to clear IPv4 adjacency entry statistics. Syntax MSR2000/MSR3000: reset system internal adj4 statistics MSR4000: reset system internal adj4 statistics slot slot-number Views Probe view Predefined user roles network-admin Parameters slot slot-number: Specifies the card by its slot number. (MSR4000.) reset system internal adj6 statistics Use reset system internal adj6 statistics to clear IPv6 adjacency entry statistics.
Views Probe view Predefined user roles network-admin Parameters slot slot-number: Specifies a card by its slot number. (MSR4000.) reset system internal fib statistics Use reset system internal fib statistics to clear FIB statistics. Syntax MSR2000/MSR3000: reset system internal fib statistics MSR4000: reset system internal fib statistics slot slot-number Views Probe view Predefined user roles network-admin Parameters slot slot-number: Specifies a card by its slot number. (MSR4000.
reset system internal ipv6 multicast forwarding-table dummy Use reset system internal ipv6 multicast forwarding-table dummy to remove the temporary IPv6 multicast forwarding entries.
Views Probe view Predefined user roles network-admin Parameters event: Clears logs about IPv6 RIB route changes. standby slot slot-number: Clears backup IPv6 RIB logs for a card. Without this option, the command clears IPv6 RIB logs. (MSR4000.) reset system internal ipv6 rib nib log Use reset system internal ipv6 rib nib log to clear IPv6 next hop logs.
Parameters standby slot slot-number: Clears backup IPv6 RIB statistics of a card. Without this option, the command clears IPv6 RIB statistics. (MSR4000.) reset system internal ipv6 route-direct log Use reset system internal ipv6 route-direct log to clear IPv6 direct route logs. Syntax reset system internal ipv6 route-direct { event | notify | nib } log Views Probe view Predefined user roles network-admin Parameters event: Clears interface event logs. notify: Clears interface event notification logs.
Predefined user roles network-admin Parameters slot slot-number: Specifies a card. The slot-number argument represents the number of the slot that holds the card. (MSR4000.) Related commands display system internal l2vpn l2vfib record reset system internal mac-address statistics Use reset system internal mac-address statistics to clear MAC address table statistics.
rcv received-id: Specifies the MBUF Relay receiver by its ID. If no MBUF Relay receiver is specified, the command clears MBUF Relay statistics for all the receivers on the CPU. reset system internal mpls lfib record Use reset system internal mpls lfib record to clear information recorded by the MPLS LFIB module.
Parameters vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. If this option is not specified, this command removes the temporary multicast forwarding entries on the public network. source-address: Specifies a multicast source address. If this argument is not specified, this command removes the temporary multicast forwarding entries for all multicast sources. group-address: Specifies a multicast group address in the range of 224.0.0.
reset system internal ospf event-log Use reset system internal ospf event-log to clear OSPF logs. Syntax reset system internal ospf event-log { interface | nib | notify } Views Probe view Predefined user roles network-admin Parameters interface: Clears interface event logs. nib: Clears NIB logs. notify: Clears interface notification logs. reset system internal rib log Use reset system internal rib log to clear RIB logs.
reset system internal rib nib log [ standby slot slot-number ] Views Probe view Predefined user roles network-admin Parameters standby slot slot-number: Clears backup next hop logs for a card. Without this option, the command clears next hop logs. (MSR4000.) reset system internal rib summary Use reset system internal rib summary to clear RIB statistics.
reset system internal route-static nib log Use reset system internal route-static nib log to clear static route NIB logs. Syntax reset system internal route-static nib log Views Probe view Predefined user roles network-admin reset system internal sflow statistics Use reset system internal sflow statistics to clear the sFlow statistics.
S switch console Use switch console on an MSR4000 to change the operating mode of the MPU's console port. Syntax switch console { mpu | spu } Views Probe view Predefined user roles network-admin network-operator Parameters mpu: Uses the MPU's console port for the MPU. spu: Uses the MPU's console port for the SPU. Usage guidelines The MSR4000 SPU card does not have console ports. To test or debug an SPU card, you can configure the switch console spu command to use the MPU's console port.
Usage guidelines The specified file path cannot contain file links. A file link is similar to a file shortcut and points to a file or directory. You can access a file or directory through a file link.
vpm-mirror Use vpm-mirror to mirror the packets between a VPM card and CPU to a specified interface. Syntax vpm-mirror slot slot-num port port-num { all | command | data | stop } to if-name Views Probe view Predefined user roles network-admin network-operator Parameters slot-num: Specifies a VPM card. port-num: Specifies a VPM interface. all: Mirrors all packets between the VPM interface and CPU. command: Mirrors command packets between the VPM interface and CPU.
Support and other resources Contacting HP For worldwide technical support information, see the HP support website: http://www.hp.
Conventions This section describes the conventions used in this documentation set. Command conventions Convention Description Boldface Bold text represents commands and keywords that you enter literally as shown. Italic Italic text represents arguments that you replace with actual values. [] Square brackets enclose syntax choices (keywords or arguments) that are optional. { x | y | ... } Braces enclose a set of required syntax choices separated by vertical bars, from which you select one.
Network topology icons Represents a generic network device, such as a router, switch, or firewall. Represents a routing-capable device, such as a router or Layer 3 switch. Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that supports Layer 2 forwarding and other Layer 2 features. Represents an access controller, a unified wired-WLAN module, or the switching engine on a unified wired-WLAN switch. Represents an access point. Represents a mesh access point.
Index BDFLMPRSVW display hardware internal dump chip,20 B display hardware internal dump lsw acltable,21 bcm,1 display hardware internal dump lsw mactable,22 D display hardware internal dump lsw vlantable,22 debugging ha,1 display hardware internal dump slot inner-port,23 debugging lipc,2 display hardware internal dump slot inner-port chip,23 debugging physical,3 display hardware internal pcicfg,24 debugging physical card,3 display hardware internal physical,25 debugging physical lsw,4 displ
display system internal bgp interface,39 display system internal ip vpn-binding,60 display system internal bgp l2vpn auto-discovery advertise,39 display system internal ip vpn-instance,61 display system internal bgp l2vpn auto-discovery verbose,40 display system internal ip vpn-instance statistics,61 display system internal ip vpn-instance inactive,61 display system internal ipv6 address,62 display system internal bgp l2vpn signaling advertise,40 display system internal ipv6 adjacent-table,62 displa
display system internal ipv6 rib event protocol,78 display system internal lipc mtcp group,98 display system internal ipv6 rib event statistics,78 display system internal lipc mtcp performance,98 display system internal ipv6 rib log,78 display system internal lipc mtcp statistics,99 display system internal ipv6 rib memory,79 display system internal lipc pcb mbuf statistics,99 display system internal ipv6 rib nib log,79 display system internal lipc pcb statistics,99 display system internal ipv6 rib
display system internal multicast forwarding-table dummy,116 display system internal rib event policy,137 display system internal multicast forwarding-table verbose,116 display system internal rib event protocol,138 display system internal rib event prefix,138 display system internal rib event statistics,138 display system internal multicast record,118 display system internal rib ftn,139 display system internal multicast-vlan forwarding-table verbose,119 display system internal rib ftn summary,139 d
memory boundary-check scan,154 reset system internal mpls lfib record,164 mpls lfib record size,155 reset system internal multicast forwarding-table dummy,164 mpls te path-calculation,155 reset system internal multicast record,165 multicast record,156 reset system internal nd statistics,165 P reset system internal ospf event-log,166 probe,157 reset system internal rib log,166 R reset system internal rib nib log,166 reset hardware internal dump slot inner-port counter,157 reset system internal
