R0106-HP MSR Router Series Probe Command Reference(V7)

1
Probe commands
The commands in this book are designed only for developers to debug software.
B
bcm
Use bcm to execute probe commands for a Broadcom chip.
Syntax
bcm chassis-num slot-num/subslot-num chip-num string
Views
Probe view
Predefined user roles
network-admin
network-operator
Parameters
chassis-num: Specifies a chassis by its number, which is always 0.
slot-num: Specifies a slot by its number in the range of 0 to 255.
subslot-num: Specifies a subslot by its number in the range of 0 to 255.
chip-num: Specifies a chip by its number in the range of 0 to 31.
string: Specifies probe commands for the Broadcom chip. Use slashes (/) to separate commands.
Usage guidelines
Use this command to execute the specified probe commands for the specified switching chip. If you
specify two or more commands for the string argument, separate the commands with slashes.
D
debugging ha
Use debugging ha to enable HA submodule debugging.
Use undo debugging ha to disable HA submodule debugging.
Syntax
debugging ha { all | config | fsm | policy | standby | sync }
undo debugging ha { all | config | fsm | policy | standby | sync }