R0106-HP MSR Router Series Probe Command Reference(V7)

2
Default
HA submodule debugging is disabled.
Views
User view
Predefined user roles
network-admin
Parameters
all: Specifies debugging for all HA submodules.
config: Specifies config submodule debugging.
fsm: Specifies FSM submodule debugging.
policy: Specifies policy submodule debugging.
standby: Specifies backup HA submodule debugging.
sync: Specifies sync submodule debugging.
debugging lipc
Use debugging lipc to enable debugging for LIPC.
Syntax
debugging lipc { detail | dump port | lgmp | mbuf | mtcp | pub | stcp | stream | topo } [ lip lip ]
undo debugging lipc { detail | dump port | lgmp | mbuf | mtcp | pub | stcp | stream | topo | stream }
[ lip lip ]
Views
User view
Predefined user roles
network-admin
Parameters
detail: Enables detailed debugging.
dump port: Specifies a port number in the range of 0 to 65535.
lgmp: Enables debugging for the LIPC LGMP module.
mbuf: Enables debugging for the LIPC MBUF module.
mtcp: Enables debugging for the LIPC MTCP module.
pub: Enables debugging for the LIPC PUB module.
stcp: Enables debugging for the LIPC STCP module.
stream: Enables debugging for the LIPC STREAM module.
topo: Enables debugging for the LIPC TOPO module.
lip lip: Specifies a remote node by its ID in the range of 0 to 32767.