R0106-HP MSR Router Series Probe Command Reference(V7)

101
Predefined user roles
network-admin
Parameters
lip lip: Specifies a remote node by its ID in the range of 0 to 32767.
Usage guidelines
This command is used for examine whether the PUBLISH module at a node encounters an out-of-order
problem.
display system internal lipc publish statistics
Use display system internal lipc publish statistics to display statistics for LIPC PUBLISH modules.
Syntax
display system internal lipc publish statistics [ lip lip ]
Default
This command displays statistics for the LIPC PUBLISH module at the local node.
Views
Probe view
Predefined user roles
network-admin
Parameters
lip lip: Specifies a remote node by its ID in the range of 0 to 32767.
display system internal lipc stcp event
Use display system internal lipc stcp event to display information about LIPC unicast events.
Syntax
display system internal lipc stcp event { sync | trans } [ lip lip ]
Default
This command displays information about LIPC unicast events for the local node.
Views
Probe view
Predefined user roles
network-admin
Parameters
sync: Specifies LIPC unicast control packet events.
trans: Specifies LIPC unicast data packet events.
lip lip: Specifies a remote node by its ID in the range of 0 to 32767.