R0106-HP MSR Router Series Probe Command Reference(V7)

102
Usage guidelines
This command displays information about LIPC unicast events, including connection, DACK, destruction,
and time sequence exchange. HP recommends that you use this command for troubleshooting when you
find any problem with LIPC unicast. Use this command before the system resources are used up. When
the system resources are used up, old information is replaced by new information.
display system internal lipc stcp global-server
Use display system internal lipc stcp global-server to display information about the global well-known
ports for LIPC unicast.
Syntax
display system internal lipc stcp global-server [ lip lip ]
Default
This command displays information about the global well-known ports for LIPC unicast at the local node.
Views
Probe view
Predefined user roles
network-admin
Parameters
lip lip: Specifies a remote node by its ID in the range of 0 to 32767.
display system internal lipc stcp links
Use display system internal lipc stcp links to display information about LIPC unicast connections,
including received and transmitted packet information, state information, and buffer information.
Syntax
display system internal lipc stcp links { all | detail port | global gport | listening | local lport |
singledetail lport rport } [ lip lip ]
Default
This command displays information about LIPC unicast connections at the local node.
Views
Probe view
Predefined user roles
network-admin
Parameters
all: Specifies all unicast connections at the local node.
detail port: Specifies a port by its number in the range of 0 to 65535.
global gport: Specifies a global well-known port by its number in the range of 100 to 8100.
listening: Specifies the connections in listening state at the local node.
local lport: Specifies a local port by its number in the range of 10100 to 65535.