R0106-HP MSR Router Series Probe Command Reference(V7)

104
display system internal lipc stcp status
Use display system internal lipc stcp status to display unicast transmission state information, including
sequence number, ACK sequence number, send flag, and receive flag of the unicast packets.
Syntax
display system internal lipc stcp status { recv | send } [ lip lip ]
Views
Probe view
Predefined user roles
network-admin
Parameters
recv: Specifies the receiving end.
send: Specifies the sending end.
lip lip: Specifies a remote node by its ID in the range of 0 to 32767.
Usage guidelines
This command is used for analyzing transmission reliability of unicast packets.
display system internal lipc stream
Use display system internal lipc stream to display information about LIPC unicast streams.
Syntax
display system internal lipc stream { ack | reass | send } port portID [ lip lip ]
Default
This command displays information about LIPC unicast streams at the local node.
Views
Probe view
Predefined user roles
network-admin
Parameters
ack: Specifies the received ACK messages on the specified port.
reass: Specifies the reassembled streams on the specified port.
send: Specifies the sent streams on the specified port.
port portID: Specifies a port by its port number in the range of 0 to 65535.
lip lip: Specifies a remote node by its ID in the range of 0 to 32767.
display system internal lipc sudp pcb-info
Use display system internal lipc sudp pcb-info to display the detailed PCB information of SUDP modules.