R0106-HP MSR Router Series Probe Command Reference(V7)

3
debugging physical
Use debugging physical to enable IPC-related debugging.
Use undo debugging physical to disable IPC-related debugging.
Syntax
debugging physical chassis chassis-number slot slot-number { mbus | lipc | mbuf-relay } { all | error |
event | input | output }
undo debugging physical chassis chassis-number slot slot-number { mbus | lipc | mbuf-relay } { all |
error | event | input | output }
Default
IPC-related debugging is disabled.
Views
Probe view
Predefined user roles
network-admin
network-operator
Parameters
chassis chassis-num: Specifies a chassis by its number, which is always 0.
slot slot-num: Specifies a slot by its number.
mbus: Specifies the management bus protocol.
lipc: Specifies Leopard IPC.
mbuf-relay: Specifies MBUF relay.
all: Specifies all types of debugging.
error: Specifies error debugging.
event: Specifies event debugging.
input: Specifies input debugging.
output: Specifies output debugging.
Usage guidelines
This command supports enabling debugging for a specified module, facilitating debugging in
development.
debugging physical card
Use debugging physical card to enable debugging for the card system.
Use undo debugging physical card to disable debugging for the card system.
Syntax
debugging physical if-name card [ all | error | event | packet ]
undo debugging physical if-name card [ all | error | event | packet ]