R0106-HP MSR Router Series Probe Command Reference(V7)

118

display system internal multicast record

Use display system internal multicast record to display operation records about multicast entries.

Syntax

MSR2000/MSR3000:

display system internal multicast record { statistics | { { all | fail } [ { group [ group-address |

ipv6-group-address ] | source [ source-address | ipv6-source-address ] } * | item item-list | filter

{ exclude | include } { { add-l2-ip | add-l2-ip-port | add-l2-ip-slot | add-l2-mac | add-l2-mac-port |

del-l3-slot | set-l3-iif } * | ipmc-type-all } ] [ verbose ] } }

MSR4000:

display system internal multicast record { statistics | { { all | fail } [ { gr

oup [ group-address |

ipv6-group-address ] | source [ source-address | ipv6-source-address ] } * | item item-list | filter

{ exclude | include } { { add-l2-ip | add-l2-ip-port | add-l2-ip-slot | add-l2-mac | add-l2-mac-port |

del-l3-slot | set-l3-iif } * | ipmc-type-all } ] [ verbose ] } } [ slot slot-number ]

Views

Probe view

Predefined user role

network-admin

Parameters

statistics: Displays statistics for operation records.

all: Specifies all operation records.

fail: Specifies failed operation records.

group-address: Specifies a multicast group address.

ipv6-group-address: Specifies an IPv6 multicast group address.

source-address: Specifies a multicast source address.

ipv6-source-address: Specifies an IPv6 multicast source address.

item item-list: Specifies one or more records. To display one record, set the value of the item-list argument

to 1. To display more records, use the form start-item [ to end-item ]. The value ranges for the start-item

argument and the end-item argument are 1 to 500000.

filter: Specifies the operation to filter operation records.

exclude: Specifies the operation to display operation records that do not meet the specified criteria.

include: Specifies the operation to display operation records that meet the specified criteria.

add-l2-ip: Specifies the operation to add Layer 2 IP multicast entries.

add-l2-ip-port: Specifies the operation to add ports to Layer 2 IP multicast entries.

add-l2-ip-slot: Specifies the operation to install a card. Card information is then added to Layer 2 IP

multicast entries.