R0106-HP MSR Router Series Probe Command Reference(V7)

119
add-l2-mac: Specifies the operation to add Layer 2 MAC multicast entries.
add-l2-mac-port: Specifies the operation to add ports to Layer 2 MAC multicast entries.
add-l2-mac-slot: Specifies the operation to install a card. Card information is then added to Layer 2
MAC multicast entries.
add-l3-ipm: Specifies the operation to add Layer 3 multicast entries.
add-l3-oif: Specifies the operation to add outgoing interfaces to Layer 3 multicast entries.
add-l3-port: Specifies the operation to add outgoing ports to Layer 3 multicast entries.
add-l3-slot: Specifies the operation to install a card. The card provides outgoing interfaces for Layer 3
distributed forwarding.
del-l2-ip: Specifies the operation to remove Layer 2 IP multicast entries.
del-l2-ip-port: Specifies the operation to remove ports from Layer 2 IP multicast entries.
del-l2-ip-slot: Specifies the operation to remove a card. Card information is then deleted from Layer 2 IP
entries.
del-l2-mac: Specifies the operation to remove Layer 2 MAC multicast entries.
del-l2-mac-port: Specifies the operation to remove ports from Layer 2 MAC multicast entries.
del-l2-mac-slot: Specifies the operation to remove a card. Card information is then deleted from Layer 2
MAC entries.
del-l3-ipm: Specifies the operation to remove Layer 3 IP multicast entries.
del-l3-oif: Specifies the operation to remove outgoing interfaces from Layer 3 multicast entries.
del-l3-port: Specifies the operation to remove outgoing ports from Layer 3 multicast entries.
del-l3-slot: Specifies the operation to remove a card. The card provided outgoing interfaces for Layer 3
distributed forwarding before being removed.
set-l3-iif: Specifies the operation to set incoming interfaces for Layer 3 multicast entries.
ipmc-type-all: Specifies all types of operations.
verbose: Specifies to display detailed information. If the outgoing interface and outgoing port in the
record are not complete, you need to specify this keyword.
slot slot-number: Specifies a card by its slot number. If no card is specified, this command displays
operation records about multicast entries for the MPU. (MSR4000.)
display system internal multicast-vlan forwarding-table verbose
Use display system internal multicast-vlan forwarding-table verbose to display detailed information
about the multicast VLAN forwarding table.
Syntax
MSR2000/MSR3000:
display system internal multicast-vlan forwarding-table verbose [ group-address [ mask { mask-length |
mask } ] | source-address [ mask { mask-length | mask } ] | subvlan vlan-id | vlan vlan-id ] *
MSR4000: