R0106-HP MSR Router Series Probe Command Reference(V7)

5
ioctl: Specifies the ioctl submodule of the switching module.
mac: Specifies the MAC submodule of the switching module.
mc: Specifies the multicast submodule of the switching module.
ni: Specifies the NI submodule of the switching module.
port: Specifies the port submodule of the switching module.
proto: Specifies the protocol submodule of the switching module.
psec: Specifies the port security submodule of the switching module.
qos: Specifies the QoS submodule of the switching module.
sys: Specifies the system submodule of the switching module.
vlan: Specifies the VLAN submodule of the switching module.
all: Specifies all types of debugging.
error: Specifies error debugging.
event: Specifies event debugging.
timer: Specifies timer debugging.
Usage guidelines
Outputting the debugging information affects system operation efficiency. When you diagnose a
network fault, use this command to enable debugging for the specified submodule of the switching
module, rather than multiple submodules.
Related commands
display system internal dump lsw debugging
debugging physical mgf
Use debugging physical mgf to enable debugging for the forwarding card.
Use undo debugging physical mgf to disable debugging for the forwarding card.
Syntax
debugging physical mgf { all | error | event | packet }
undo debugging physical mgf { all | error | event | packet }
Default
Debugging for the forwarding card is disabled.
Views
Probe view
Predefined user roles
network-admin
network-operator
Parameters
all: Specifies all types of debugging.
error: Specifies error debugging.