R0106-HP MSR Router Series Probe Command Reference(V7)

132
Predefined user roles
network-admin
Parameters
nib-id: Specifies a next hop by its ID in the range of 1 to FFFFFFFF.
verbose: Displays detailed OSPFv3 next hop information.
display system internal ospfv3 peer standby
Use display system internal ospfv3 peer standby to display backup OSPFv3 neighbor information.
Syntax
MSR4000:
display system internal ospfv3 [ process-id ] [ area area-id ] peer [ [ interface-type interface-number ]
[ verbose ] | peer-router-id | statistics ] standby slot slot-number
Views
Probe view
Predefined user roles
network-admin
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535.
area area-id: Specifies an area by its ID, an IPv4 address or a decimal integer in the range of 0 to
4294967295 that is translated into the IPv4 address format.
interface-type interface-number: Specifies an interface by its type and number.
verbose: Displays detailed neighbor information.
peer-router-id: Specifies a neighbor router ID.
statistics: Displays OSPFv3 neighbor statistics.
standby slot slot-number: Displays backup OSPFv3 neighbor information for a card. Without this option,
the command displays OSPFv3 neighbor information. (MSR4000.)
Usage guidelines
If no OSPFv3 process is specified, this command displays neighbor information for all OSPFv3
processes.
If no area is specified, this command displays neighbor information for all OSPFv3 areas.
If both the interface-type interface-number and peer-router-id arguments are not specified, this command
displays neighbor information for all interfaces.
display system internal ospfv3 prefix
Use display system internal ospfv3 prefix to display OSPFv3 prefix information.
Syntax
display system internal ospfv3 [ process-id ] prefix { inter | intra } [ ipv6-address prefix-length ]