R0106-HP MSR Router Series Probe Command Reference(V7)

151
slot slot-number: Specifies a card. The slot-number argument represents the number of the slot that holds
the card. (MSR4000.)
lipc dump-port
Use lipc dump-port to enable dumping for a unicast port.
Syntax
lipc dump-port port &<1-5> [ lip lip ]
undo lipc dump-port [ lip lip ]
Default
Dumping is disabled on unicast ports.
Views
Probe view
Predefined user roles
network-admin
Parameters
dump-port port &<1-5>: Specifies one or multiple unicast ports, where the value range for the port
argument is 1 to 65535 and &<1-5> means that you can specify up to five ports.
lip lip: Specifies a remote node by its ID in the range of 0 to 32767.
Usage guidelines
After you enable dumping on a unicast port, the system records information about all received and
transmitted packets through the port in the file /proc/lipc/dumpinfo.
lipc performance
Use lipc performance to configure performance statistics for LIPC unicast or multicast connections.
Syntax
lipc performance { mtcp | stcp } { clear | off | on } [ lip lip ]
Default
Performance statistics is disabled.
Views
Probe view
Predefined user roles
network-admin
Parameters
mtcp: Specifies the LIPC MTCP module.
stcp: Specifies the LIPC STCP module.
clear: Clears performance statistics.
off: Disables performance statistics.