R0106-HP MSR Router Series Probe Command Reference(V7)

153
Usage guidelines
If the topology module of the local node does not receive the heartbeat packets from a node in up state
when the timeout time expires, it tears down all unicast and multicast connections with the node.
The timeout time needs to be modified only when you use the KDB or KGDB to debug the kernel. HP
recommends that you set a larger timeout time to avoid the other nodes from tearing down the
connections with the node whose kernel is being debugged.
list
Use list to view subdirectory or file information in the /proc/, /sys/, or /var/ directory.
Syntax
MSR2000/MSR3000:
list file-path
MSR4000:
list file-path [ slot slot-number ]
Views
Probe view
Predefined user roles
network-admin
Parameters
file-path: Specifies a subdirectory path or file path, which is case sensitive. The specified file or
subdirectory path cannot contain file links.
slot slot-number: Displays the subdirectory or file information on a card specified by its slot number. If no
card is specified, the command displays the subdirectory or file information on the MPU. (MSR4000.)
M
memory boundary-check enable
Use memory boundary-check enable to enable memory boundary check.
Use undo memory boundary-check enable to restore the default.
Syntax
MSR2000/MSR3000:
memory boundary-check enable job job-id
undo memory boundary-check enable job job-id
MSR4000:
memory boundary-check enable job job-id [ slot slot-number [ cpu cpu-number ] ]
undo memory boundary-check enable job job-id [ slot slot-number [ cpu cpu-number ] ]
Default
Memory boundary check is disabled.