R0106-HP MSR Router Series Probe Command Reference(V7)

155
If a memory overwrite is detected, the system displays 128-byte memory contents starting from the 16th
byte preceding the detected memory address.
When more than one memory overwrite is detected, the system only records and displays 128-byte
memory contents with the lowest memory address detected.
Related commands
memory boundary-check enable
mpls lfib record size
Use mpls lfib record size to set the maximum number of entries that the MPLS LFIB module records.
Syntax
MSR2000/MSR3000:
mpls lfib record size size
MSR4000:
mpls lfib record size size slot slot-number
Default
The MPLS LFIB module can record a maximum of 4096 entries.
Views
Probe view
Predefined user roles
network-admin
Parameters
size: Specifies the maximum number of entries.
slot slot-number: Specifies a card. The slot-number argument represents the number of the slot that holds
the card. (MSR4000.)
mpls te path-calculation
Use mpls te path-calculation to perform CSPF calculation based on the constraints and return the result.
Syntax
mpls te path-calculation { destination address | tunnel-interface tunnel number [ destination address ] }
[ bandwidth [ ct0 | ct1 | ct2 | ct3 ] bandwidth-value ] [ priority setup-priority [ hold-priority ] ] [ affinity
attribute-value [ mask mask-value ] ]
Views
Probe view
Predefined user roles
network-admin
Parameters
destination address: Specifies the destination address for the CSPF calculation.