R0106-HP MSR Router Series Probe Command Reference(V7)

11
Views
Probe view
Predefined user roles
network-admin
Parameters
all: Enables all debugging.
message: Enables message debugging. The output displays VN entries that are sent by routers and
synchronized by cards.
hardware: Enables hardware debugging. The output displays information sent to drivers and information
returned by drivers.
bind: Enables bind debugging. The output displays information about prefix-bound VN and VN-bound
adjacency table/next hop label forwarding entry (NHLFE).
notify: Enables notify debugging. The output displays adjacency table/NHLFE change notification sent
to the VN, and VN change notification sent to the prefix table.
slot slot-number: Specifies a card by its slot number. (MSR4000.)
debugging system internal igmp-snooping fsm tracing
Use debugging system internal igmp-snooping fsm tracing to enable trace log debugging for the IGMP
snooping state machine.
Use undo debugging system internal igmp-snooping fsm tracing to disable trace log debugging for the
IGMP snooping state machine.
Syntax
MSR2000/MSR3000:
debugging system internal igmp-snooping fsm tracing [ vlan vlan-id [ group-address source-address ] ]
undo debugging system internal igmp-snooping fsm tracing
MSR4000:
debugging system internal igmp-snooping fsm tracing [ vlan vlan-id [ group-address source-address ] ]
[ slot slot-number ]
undo debugging system internal igmp-snooping fsm tracing
Default
Trace log debugging for the IGMP snooping state machine is disabled.
Views
Probe view
Predefined user role
network-admin
Parameters
vlan vlan-id: Specifies a VLAN by its ID. The value range for the vlan-id argument is 1 to 4094. If you do
not specify any VLAN, this command outputs trace logs for all VLANs.