R0106-HP MSR Router Series Probe Command Reference(V7)

13
Default
IPv6 FIB prefix debugging is disabled.
Views
Probe view
Predefined user roles
network-admin
Parameters
all: Enables all types of IPv6 FIB prefix debugging.
message: Enables IPv6 FIB prefix message debugging. If you specify this keyword, the system displays
the IPv6 FIB prefix obtained from the routing table or synchronized from other cards or devices.
hardware: Enables IPv6 FIB prefix hardware debugging. If you specify this keyword, the system displays
the FIB6 information issued to the driver, and the returned FIB6 information from the driver.
slot slot-number: Specifies a card by its slot number. (MSR4000.)
debugging system internal l2vpn l2vfib
Use debugging system internal l2vpn l2vfib to enable L2VPN L2VFIB debugging.
Use undo debugging system internal l2vpn l2vfib to disable L2VPN L2VFIB debugging.
Syntax
MSR2000/MSR3000:
debugging system internal l2vpn l2vfib { ac | all | config | lpw | sync }
undo debugging system internal l2vpn l2vfib { ac | all | config | lpw | sync }
MSR4000:
debugging system internal l2vpn l2vfib { ac | all | config | lpw | sync } slot slot-number
undo debugging system internal l2vpn l2vfib { ac | all | config | lpw | sync } slot slot-number
Default
L2VPN L2VFIB debugging is disabled.
Views
Probe view
Predefined user roles
network-admin
Parameters
ac: Specifies L2VPN L2VFIB AC debugging.
all: Specifies all types of L2VPN L2VFIB debugging.
config: Specifies L2VPN L2VFIB configuration debugging.
lpw: Specifies L2VPN L2VFIB LPW debugging.
sync: Specifies L2VPN L2VFIB synchronization debugging.