R0106-HP MSR Router Series Probe Command Reference(V7)

19
Syntax
display hardware internal access-space slot-num acc-addr width-num
Views
Probe view
Predefined user roles
network-admin
network-operator
Parameters
slot-num: Specifies a slot number. It must be 0 for an MSR2000 or MSR3000, and must be in the range
of 0 to 2 for an MSR4000.
acc-addr: Specifies the hardware space in the range of 0 to 0xFFFFFFFFFFFFFFFF.
width-num: Specifies the PCI configuration access bit width in bytes. Valid values include 1, 2, 4, and 8.
Usage guidelines
This command reads the contents in the specified address space. The address space cannot be the IO
mapping space and must be able to be accessed directly. Examples of supported address spaces
include:
• Memory address space.
• Address spaces of CPUs' internal registers.
• Memory and IO space of a PCI device.
• Address space of a local bus management device, such as the address space of a CPLD or RTC. The
flash memory is not included.
The supported spaces depend on the MPU model.
display hardware internal cpu-version
Use display hardware internal cpu-version to display version information about the CPUs on the host,
forwarding cards, and interface cards.
Syntax
display hardware internal cpu-version
Views
Probe view
Predefined user roles
network-admin
display hardware internal dspmem
Use display hardware internal dspmem to display DSP memory information.
Syntax
display hardware internal dspmem if-name dsp-num dsp-addr