R0106-HP MSR Router Series Probe Command Reference(V7)

20
Views
Probe view
Predefined user roles
network-admin
network-operator
Parameters
if-name: Specifies a voice interface.
dsp-num: Specifies a DSP by its number in the range of 0 to 15.
dsp-addr: Specifies a DSP memory address in the range of 0x00000 to 0x27FFF.
Usage guidelines
The DSP numbers and addresses vary with different voice cards. Use the correct DSP number and
address to view DSP memory information.
display hardware internal dump
Use display hardware internal dump to display the dump register information of a chip.
Syntax
display hardware internal dump if-name [ card ] chip chip-num [ global | channel ]
Views
Probe view
Predefined user roles
network-admin
network-operator
Parameters
if-name: Specifies a registered interface or controller by its name.
card: Specifies the card system.
chip-num: Specifies a chip by its number in the range of 0x00 to 0xFF.
global: Specifies the global register.
channel: Specifies the channel register.
Usage guidelines
This command reads the DUMP register information of the specified chip, one group of values each time.
display hardware internal dump chip
Use display hardware internal dump chip to display register entry information.
Syntax
display hardware internal dump if-name chip chip-num [ acltable | cpuport | devicemap |
multicasttable | meter | mirror | pcieconfig | phy | isolationtable | qosprofile | statistics | stptable |
vlanqos | all | cpld | global | mac | mactable | vlantable ]