R0106-HP MSR Router Series Probe Command Reference(V7)

21
Views
Probe view
Predefined user roles
network-admin
network-operator
Parameters
if-name: Specifies an interface by its name.
chip-num: Specifies a chip by its number in the range of 0x00 to 0xFF.
acltable: Displays ACL entry information.
cpuport: Displays CPU port information.
devicemap: Displays device mapping table information.
multicasttable: Displays multicast entry information.
meter: Displays chip rule information.
mirror: Displays mirroring group information.
pcieconfig: Displays PCIE configuration information.
phy: Displays PHY register information.
isolationtable: Displays port isolation group information.
qosprofile: Displays QoS configuration information.
statistics: Displays statistics.
stptable: Displays STP table information.
vlanqos: Displays VLAN QoS configuration information.
all: Displays information about all entries.
cpld: Displays CPLD information.
global: Displays global register information.
mac: Displays MAC register information.
mactable: Displays MAC address table information.
vlantable: Displays VLAN entry information.
Usage guidelines
This command reads DUMP register information for the specified chip. It reads a group of DUMP register
values each time.
display hardware internal dump lsw acltable
Use display hardware internal dump lsw subslot-num acltable start-index total-num chip-num to display
DUMP ACL entry information.
Syntax
display hardware internal dump lsw subslot-num acltable start-index total-num chip-num