R0106-HP MSR Router Series Security Command Reference(V7)

132
timer interval, it retransmits the EAP-Request/Notification packet. After the device has made the
maximum retransmission attempts but received no response, it stops the 802.1X authentication process
for the client.
Examples
# Set the SmartOn client timeout timer to 20 seconds.
<Sysname> system-view
[Sysname] dot1x smarton timer supp-timeout 20
Related commands
• display dot1x
• dot1x smarton retry
dot1x timer
Use dot1x timer to set 802.1X timers.
Use undo dot1x timer to restore the defaults.
Syntax
dot1x timer { handshake-period handshake-period-value | quiet-period quiet-period-value |
reauth-period reauth-period-value | server-timeout server-timeout-value | supp-timeout
supp-timeout-value | tx-period tx-period-value }
undo dot1x timer { handshake-period | quiet-period | reauth-period | server-timeout | supp-timeout
| tx-period }
Default
The following timers apply:
• Handshake timer: 15 seconds.
• Quiet timer: 60 seconds.
• Periodic reauthentication timer: 3600 seconds.
• Server timeout timer: 100 seconds.
• Client timeout timer: 30 seconds.
• Username request timeout timer: 30 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
handshake-period handshake-period-value: Sets the handshake timer in seconds. The value range for
the handshake-period-value argument is 5 to 1024.
quiet-period quiet-period-value: Sets the quiet timer in seconds. The value range for the
quiet-period-value argument is 10 to 120.
reauth-period reauth-period-value: Sets the periodic reauthentication timer in seconds. The value range
for the reauth-period-value argument is 60 to 7200.