R0106-HP MSR Router Series Security Command Reference(V7)

21
authorization login
Use authorization login to configure the authorization method for login users.
Use undo authorization login to restore the default.
Syntax
In non-FIPS mode:
authorization login { hwtacacs-scheme hwtacacs-scheme-name [ radius-scheme radius-scheme-name ]
[ local ] [ none ] | local [ none ] | none | radius-scheme radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] [ none ] }
undo authorization login
In FIPS mode:
authorization login { hwtacacs-scheme hwtacacs-scheme-name [ radius-scheme radius-scheme-name ]
[ local ] | local | radius-scheme radius-scheme-name [ hwtacacs-scheme hwtacacs-scheme-name ]
[ local ] }
undo authorization login
Default
The default authorization method of the ISP domain is used for login users.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a
case-insensitive string of 1 to 32 characters.
local: Performs local authorization.
none: Does not perform authorization. The following default authorization information applies after users
pass authentication:
• FTP, SFTP, and SCP users have the root directory of the NAS set as the working directory, but they
do not have the access permission to the root directory.
• Other login users are assigned the default user role. For more information about the default user
role function, see Fundamentals Configuration Guide.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of
1 to 32 characters.
Usage guidelines
The RADIUS authorization configuration takes effect only when the authentication method and
authorization method of the ISP domain use the same RADIUS scheme.
You can specify one primary authorization method and multiple backup authorization methods.
When the default authorization method is invalid, the device attempts to use the backup authorization
methods in sequence. For example, the authorization login radius-scheme radius-scheme-name local
none command specifies the default RADIUS authorization method and two backup methods (local
authorization and no authorization). The device performs RADIUS authorization by default and performs