R0106-HP MSR Router Series Security Command Reference(V7)

381
SSH commands
Some MSR routers support the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for
features, commands, and parameters might differ in FIPS mode and non-FIPS mode. For more
information about FIPS mode, see Security Configuration Guide.
By default, the device provides low encryption. To obtain high encryption, you must install the Strong
Cryptography feature license. This feature provides stronger cryptography, additional IPsec tunnels, and
higher encryption performance. For more information about obtaining the Strong Cryptography feature
license, see the release notes or contact your HP sales representative.
Support for features, commands, and parameters depends on the cryptography capability.
Unless otherwise noted, SSH server collectively refers to the Stelnet server, SFTP server, SCP server, and
NETCONF-over-SSH server.
SSH server commands
display ssh server
Use display ssh server on an SSH server to display the SSH server status or sessions.
Syntax
display ssh server { session | status }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
session: Displays the SSH server sessions.
status: Displays the SSH server status.
Examples
# Display the SSH server status.
<Sysname> display ssh server status
SSH server: Disable
SSH version : 1.99
SSH authentication-timeout : 60 second(s)
SSH server key generating interval : 0 hour(s)
SSH authentication retries : 3 time(s)
SFTP server: Disable
SFTP server Idle-Timeout: 10 minute(s)