R0106-HP MSR Router Series Security Command Reference(V7)

475
Table 67 Command output
Field Descri
p
tion
Initiator Information about the session from the initiator to the responder.
Responder Information about the session from the responder to the initiator.
DS-Lite tunnel peer
Address of the DS-Lite tunnel peer.
When the session does not belong to any DS-Lite tunnels, this field displays a
hyphen (-).
VPN instance/VLAN ID/VLL ID
MPLS L3VPN to which the session belongs.
VLAN and INLINE to which the session belongs during Layer 2 forwarding.
If any of them is not specified, a hyphens (-) is displayed for the proper field.
Protocol
Transport layer protocol:
• DCCP.
• ICMP.
• ICMPv6.
• Raw IP.
• SCTP.
• TCP.
• UDP.
• UDP-Lite.
The number in the brackets indicates the protocol number.
State Session state.
Application
Application layer protocol, FTP or DNS.
The value of OTHER indicates an unknown protocol with a non-well-known
port.
Start time Session establishment time.
TTL Remaining lifetime of the session, in seconds.
Interface(in) Interface for the first incoming packet from the initiator to the responder.
Interface(out) Interface for the first outgoing packet from the initiator to the responder.
Initiator->Responder Number of packets and packet bytes from the initiator to the responder.
Responder->Initiator Number of packets and packet bytes from the responder to the initiator.
Total sessions found Total number of found session entries.
reset session table ipv4
Use reset session table ipv4 to clear IPv4 session entries.
Syntax
MSR2000/MSR3000:
reset session table ipv4 [ destination-ip destination-ip ] [ destination-port destination-port ] [ protocol
{ dccp | icmp | raw-ip | sctp | tcp | udp | udp-lite } ] [ source-ip source-ip ] [ source-port source-port ]
[ vpn-instance vpn-instance-name ]