R0106-HP MSR Router Series Security Command Reference(V7)

599
Field Descri
p
tion
VPN instance
MPLS L3VPN instance to which the blacklisted IPv4 address belongs. If the
blacklisted IPv4 address is on the public network, this field displays hyphens
(--).
DS-Lite tunnel peer
Peer address of the DS-Lite tunnel.
If the device is the AFTR of a DS-Lite tunnel, this field displays the B4's
address from which the packet comes.
In other situations, this field displays hyphens (--).
Type Type of the IPv4 blacklist entry, Manual or Dynamic.
TTL(sec)
Remaining aging time of the IPv4 blacklist entry, in seconds. If no aging time
is set for the entry, this field displays Never.
Dropped Number of dropped packets destined for the IPv4 address.
Totally 3 blacklist entries Total number of IPv4 blacklist entries.
Related commands
blacklist ip
display blacklist ipv6
Use display blacklist ipv6 to display IPv6 blacklist entries.
Syntax
MSR2000/MSR3000:
display blacklist ipv6 [ source-ipv6-address [ vpn-instance vpn-instance-name ] ] [ count ]
MSR4000:
display blacklist ipv6 [ source-ipv6-address [ vpn-instance vpn-instance-name ] ] [ slot slot-number ]
[ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
source-ipv6-address: Specifies the IPv6 address for a blacklist entry.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the IPv6 address belongs.
The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. Do not specify this
option if the IPv6 address is on the public network.
slot slot-number: Specifies a card by its slot number. If no card is specified, this command displays IPv6
blacklist entries on all cards. (MSR4000.)
count: Displays the number of matching IPv6 blacklist entries.
Usage guidelines
If no parameter is specified, this command displays all IPv6 blacklist entries.